Sea-spray contributes significantly to marine icing, posing a severe challenge to marine operations in cold regions. There are two parts to spray icing, i) amount of water impingement on marine structure, ii) thermodynamics/heat transfer governing the fraction of spray that freezes and adheres to the structure. Sea-spray collection provides means to investigate into marine icing phenomenon. In this ...

This paper presents a methodology to determine the thermal conductivity of ice using multiphysics analysis. This methodology used a combination of both experimentation and numerical simulation. In the experimental work, an ice block is observed using an infrared camera. The results reveal the variation in temperature over the surface. These results are dependent on two primary heat transfer parameters, ...

Considering the cold environment operations, ice accretion can occur at a rapid pace and can adversely affect the operations. In such scenario, ice detection is useful for the ice mitigation and removal upon the marine and offshore structures. Various techniques exist in the literature to detect the icing mainly utilizing its physical or electromagnetic properties. The parameters measured by these ...

Marine operations in cold climates are subjected to abundant ice accretion, which can lead to heavy ice loads over larger surface area. For safe and adequate operations on marine vessels over a larger area, remote ice detection and ice mitigation system can be useful. To study this remote ice detection option, lab experimentation was performed to detect the thermal gradient of ice with the infrared ...

Shipping operations are on the rise in the Arctic region. Due to these increased activities, maritime transport operations are encountering significant challenges with respect to the safety and reliability. These shipping operations are comprised of commercial vessels such as oil tankers, container ships, fishing vessels, tourism cruises, research and offshore exploration vessels and icebreakers In ...

The sea spray contains water droplets that are produced due to sea waves that collide with the marine structures as well as the breaking of waves due to the strong winds. Similarly, fog and precipitation at sea level may contribute to the phenomenon of sea spray containing water droplets of minuscule sizes. Wind characteristics (speed and direction) also has a direct influence on the speed of water ...

This paper presents numerical methodologies to simulate the Infrared (IR) signature of an ice cube. The ice was frozen in a cold environment (-28^oC) and allowed to have uniform temperature throughout. It was then taken out and let to warm at room temperature conditions by means of natural convection. A 3D transient heat equation is solved using three different methodologies. In the first ...

Sea-spray icing resulting from sea spray droplets accreting on exposed surfaces poses a significant safety concern for vessels and marine structures operating in cold climate regions. One of the key parameters determining the amount of ice accretion is the quantity of incoming sea spray, which eventually comes in contact with the structure in the presence of brine film freezing temperature. Hence, ...