The paper gives the study of the response of carbon fiber reinforced polymers (CRFP) quasi-isotropic shell structures under the influence of dynamic loading. The quasi-isotropic CRFP shell specimens are fabricated using Multipreg E720 laminates. These laminates are laid in such a way that shell structure has equal strength and mechanical properties in the two-dimensional (2D) plane and hence can be ...

With the extensive increase in the utilization of energy resources in the modern era, the need of energy extraction from various resources has pronounced in recent years. Thus comprehensive efforts have been made around the globe in the technological development of turbo machines where means of energy extraction is energized fluids. This development led the aviation industry to power boost due to ...

This paper presents the Multiphysics technique applied in the design optimization of a loading hanger for an aerial crane. In this study, design optimization is applied on the geometric modelling of a part being used in an aerial crane operation. A set of dimensional and loading requirements are provided. Various geometric models are built using SolidWorks® Computer Aided Design (CAD) Package. In ...

An effort is made to analyse the stresses experienced by the human femur. In order to achieve these results a CAD model was developed by using the 3-D scanning of generic human femur for an individual of 70 kg weight (approx. averaged adult weight). The marrow cavity has been approximated as a hollow cylinder. The FEM model was built using solid tetrahedral element (20-noded 186 structural ...

This paper presents a study of wind chill factor using infrared imaging. Wind chill factor is the cooling sensation due to the exposure of wind temperature environment. The wind chill factor depends on air temperature, wind velocity, and humidity. Wind chill poses serious health risks. Various wind chill index models are given in the literature. The wind chill factor is closely associated with the ...

It is well understood that sea ice is one of the biggest problems for the safety and reliability of ships and marine structures operating in the Arctic. Specially designed ships, also known as ‘icebreakers’, are usually used to clear ice to make way for merchant and cruise ships. Even then, the ship’s staff must be extremely careful with speed and steering. Heavy impacts of ice result in fatigue and ...

Ice adhesion causes many serious problems such as aircraft accidents, navigational issues on ships, and power loss on wind turbines. These challenges are mainly associated with the acute behavior of ice adhesion. The ice adheres when water seeps into the microscopic pores of the material substrate and freezes, thereby, forming an interlocking mechanism. Therefore, surface roughness has a significant ...

The shock tube is a device in which a normal shock wave is produced by the interaction of fluids at significantly high-pressure difference. The shock tube is comprised of two sections known as driver and driven sections. These two sections are interacted with the high-speed valve or a bursting disc. When the interaction happens, a shock wave forms almost instantaneously and propagates into the driven ...