• Drilling waste minimization in the Barents Sea 

      Zaki, Rezgar (Master thesis; Mastergradsoppgave, 2015-05-19)
      With the increasing demand for energy over recent decades, the Arctic region has become an interesting area for future oil and gas exploration and development. The Barents Sea has the most western position among the Arctic seas surrounding the coast of Western Russia and Northern Norway. In the recent years several oil and gas discoveries done in this area and the number of wells is steadily ...
    • The effect of human factors on safety related to barrier management 

      Bakkli, Anders; Tennfjord, Malene (Master thesis; Mastergradsoppgave, 2019-05-31)
      The aim of this thesis is to establish information on barrier elements where human errors take place and to establish proactive measures to eliminate these errors. The three main objectives for this project is to review the current safety and barrier management approach in Equinor, identify to what degree human factors have an impact on safety and make recommendations for improvements on safety and ...
    • Empirical and dynamical modeling of debris flow events close to Longyearbyen and Svea, Svalbard 

      Engelke, Christian (Master thesis; Mastergradsoppgave, 2012-06-30)
      Debris flows are a mountain slope hazard relatively well studied in densely populated mountainous regions, while few investigations have been done in Arctic permafrost regions. In order to get a better understanding of the processes involved in such an envi-ronment, this work focused on debris flow hazards in the mountains close to Longyear-byen and Svea on Svalbard, Norway, situated at 78°N. A ...
    • Environmental risk influencing factors for petroleum drilling in the western Barents Sea 

      Sætrum, Tina (Master thesis; Mastergradsoppgave, 2013-05-31)
      Offshore petroleum drilling in harsh and cold environment, like in the Barents Sea, can be challenging and risky due to the prevailing weather condition. How the physical environment affects systems, components, and working environment has to be enlightened in order to operate safely. The vulnerable environment, remoteness, and possible outcomes if an accident occurs are of great concern. The society, ...
    • Feasibility study of Preventing Snow Accumulations on Roofs using Airflows 

      Sjøveian, Andreas Eide (Master thesis; Mastergradsoppgave, 2020-07-09)
      This thesis is intended to contribute to research in cold climate engineering. Further it intends to provide a principle solution for structural and avalanche safety due to snowfall on roofs. We have conducted a feasibility study of preventing snow from accumulating on roofs using airflows. This includes empirical, numerical and experimental methods. Snow loads on roofs makes great impact on ...
    • Feasibility study of Unmanned Aerial Vehicles (UAV) application for ultrasonic Non-Destructive Testing (NDT) of Wind Turbine Rotor Blades. Preliminary experiments of handheld and UAV utrasonic testing on glass fibre laminate 

      Skaga, Simon Kleppevik (Master thesis; Mastergradsoppgave, 2017-05-31)
      In this thesis, we have conducted a feasibility study on UAV application for ultrasonic pulsed non-destructive testing of wind turbine rotor blades. Due to the high initial cost of wind turbines, and their decreasing availability due to increasing size and offshore locations, it is imperative to properly maintain these structures over their 10-30-year lifetime. Operation and maintenance costs can ...
    • A Feasibility Study of Using Waste Thermal Energy from a District Heating System for Absorption Cooling 

      Obi, Gerald Nsenkeng (Master thesis; Mastergradsoppgave, 2020-07-13)
      Waste incineration-based district heating plants in Norway struggle from energy efficiency drawbacks during the warmer months of the year from May - September due to the reduced demand in heating. As a result, thermal energy gets discarded to ambient air, which affects the energy efficiency of the plants. This study aims at presenting an overview of the waste incineration industry in Norway and ...
    • Finite element analysis of materials for aquaculture net cages. FEA of materials for aquaculture net cages using ANSYS Workbench 

      Myrli, Odd Einar Lockertsen (Master thesis; Mastergradsoppgave, 2017-06-20)
      The number of good sites in less exposed locations for aquaculture farming is limited. Trends are now that the fish cages are increasing in both width and depth as well as more weather-exposed locations are taken into use. As the net cages continues to increase in size, so does the material costs. The design of the sea cages should be modified for safe and reliable use in remote offshore locations. ...
    • Friction tests on polyurethane and concrete. Rolling friction tests and sliding friction tests on anti-abrasion polyurethane, anti-seepage polyurethane and concrete. 

      Hansen, Kristian (Master thesis; Mastergradsoppgave, 2018-06-01)
      The climate in arctic areas of the world is a challenge for airports. Snow and ice accumulates on the runways, forcing airports to close for snow clearing. Pilots need to know that the friction is at a respectable level before they land, and may have to return if not. This thesis looked at a polymer called polyurethane, and if this material could be used as a new runway material, considering both ...
    • A fuzzy logic-possibilistic methodology for risk-based inspection (RBI) planning of oil and gas piping subjected to microbiologically Influenced corrosion (MIC) 

      Pokhrel, Marshal (Master thesis; Mastergradsoppgave, 2016-05-31)
      The oil and gas installations are associated with risk due to different degradation mechanisms. Microbial Influenced Corrosion, commonly known as MIC, is one of them. The failures caused by MIC may have significant impacts on health, safety and environment (HSE). Therefore, to avoid failures regular inspection of the assets and maintenance plans need to be executed. With this on mind, engineers try ...
    • Icing Effects on Power Lines and Anti-icing and De-icing Methods 

      Solangi, Ali Raza (Master thesis; Mastergradsoppgave, 2018-05-30)
      Icing on power lines may lead to compromise safety and reliability of electric supply network. Prolong icing can lead to power breakdown and collapse of towers. Since power transmission lines are mostly overhead and could face the direct impact of icing, and it is one of the main challenges faced by power distribution companies in cold regions. When the ice accretion crosses the safety limit then ...
    • Identification of Challenges and Hazards associated with Cruise Traffic and Evacuation in the Arctic 

      Dalsand, Raymond; Nese, Tord (Master thesis; Mastergradsoppgave, 2016-06-06)
      Arctic cruise tourism is gaining in popularity. There is a need to better understand hazards that are connected with cruise traffic and evacuation in the Arctic. The Polar Code tries to enhance the safety of persons travelling in polar waters by giving functional requirements to life-saving appliances. However, it is unclear what is needed to achieve the required functionality, and how existing ...
    • Implementation and Control of an Inverted Pendulum on a Cart 

      Hanekam, Halvard (Master thesis; Mastergradsoppgave, 2021-05-28)
      An Inverted Pendulum on a Cart is a common system often used as a benchmark problem for control systems. The system consists of a cart that can move in one direction on the horizontal plane and a pendulum attached to the cart through a hinge point. The pendulum can rotate 360° on the plane made up of the vertical direction and the direction the cart can move. The system is controlled by applying a ...
    • Implementation of Virtual Reality (VR) simulators in Norwegian maritime pilotage training 

      Weissenberger, Finlo (Master thesis; Mastergradsoppgave, 2022-06-01)
      With millions of tons of cargo transported to and from Norwegian ports every year, the maritime waterways in Norway are heavily used. The high consequences of accidents and mishaps require well-trained seafarers and safe operating practices. The normal crews of vessels are supported by the Norwegian Coastal Administration (NCA) pilot service when operating vessels not meeting specific ...
    • Improving mechanical grip on winter tires. Finite element analysis on pressure profile of airless tire compared to conventional tire using ANSYS workbench 

      Ludvigsen, Sondre (Master thesis; Mastergradsoppgave, 2017-06-22)
      The harsh climate of the arctic has always been one of the most difficult areas to drive cars in. The severe loss in traction due to snow and icing on the roads, has led to an increased risk of collisions. The winter tires for cars has developed through the years after their introduction in the 1930’s. There have been three revolutionary changes made since then; implement of studs, changing in tread ...
    • Investigation and analysis of the ‘cold’ sensation relation with respect to associated parameters: wind velocity, ambient temperature, humidity, and irradiance 

      Nadem Leyli, Amir (Master thesis; Mastergradsoppgave, 2019-07-15)
      The Arctic is considered as one of the regions in the world with various resources including oil and gas. Many industries are moving further up north to this area or new industries are being established. Technologies and industries in the Arctic have many challenges regarding the harsh cold climate. One of the main challenges which is of importance in this thesis is human exposure to the cold that ...
    • Investigation of UAV related incidents and accidents 

      Haugse, Sigurd (Master thesis; Mastergradsoppgave, 2022-05-30)
      To this day, there is a lack of research on unmanned aerial vehicle (drone) related incidents and accidents. Knowing why these happen, what potential outcomes they may have and how to avoid them from occurring, can be crucial. There is, furthermore, potentially a lack of transparency in the unmanned aviation industry, regarding reporting of incidents. In order to prepare conclusions within one set ...
    • Limitations of Ice Accretion on Offshore Aquaculture Facilities 

      Marsden, Benjamin (Master thesis; Mastergradsoppgave, 2021-12-15)
      Sea spray icing is a constant risk for fish farms operating in cold climates, such as on the Northern Norwegian coast, and there must therefore exist methods to reduce this risk. This thesis discusses the consequences of ice accretion to the traditional plastic circular fish cage design, and how the cage reacts under the pressure of added mass from sea spray icing. The prediction of sea spray icing ...
    • MarSpray LiDAR (MSL) for the comprehensive measurement of Sea Spray for Improving the Prediction of Marine Icing in Cold Conditions 

      Dhar, Sushmit (Master thesis; Mastergradsoppgave, 2021-06-01)
      Marine icing is a very complicated phenomenon, and its prediction, evaluation, and estimation involve many uncertainties. Commonly, the most severe ice accretion is caused by sea spray. A substantial amount of study is present on sea spray ice accretion about modelling and numerical simulations with certain assumptions and not based on comprehensive real-time data. The past techniques used to measure ...
    • Matsikkerhet i Norge. Er forsyningsberedskapen tilstrekkelig? 

      Steien, Terese (Master thesis; Mastergradsoppgave, 2016-06-01)
      Tittelen på avhandlingen lyder slik: ‘Matsikkerhet i Norge – er forsyningsberedskapen tilstrekkelig?’ Denne avhandlingen omhandler matsikkerhet og en risiko- og sårbarhetsanalyse. Målet var å finne ut hvilken matsikkerhet som er i landet, hva som påvirker den og om forsyningsberedskapen er tilstrekkelig ved en eventuell krise. Målet var også å utføre en risiko- og sårbarhetsanalyse for å se på ...