• Baggage dissociation for sustainable air travel: Design study of ground baggage distribution networks 

      Hilfi, Sarah AL; Yu, Hao; Loskot, Pavel (Journal article; Tidsskriftartikkel; Peer reviewed, 2023-03-16)
      Dissociation of passenger travel from baggage delivery has been proposed as one of the radical innovations in future air travel. This concept is still relatively new and largely unexplored, so there are many issues that need to be resolved. For instance, a complete end-to-end baggage dissociation will require the ground distribution networks to deliver passenger luggage to and from the departing ...
    • A Bibliometric Analysis of the Logistical Challenges and Methods for Vaccine distribution under the Pandemic 

      Andoh, Eugenia Ama; Yu, Hao (Journal article; Tidsskriftartikkel; Peer reviewed, 2022-03-08)
      With the emergence and the widespread of the COVID-19 pandemic across the globe, there is an urgent need to effectively control the disease spread through mass vaccination. Several COVID-19 vaccines, e.g., Pfizer/BioNtech and Moderna, etc., have been proven highly effective and have been distributed and administrated in many countries. These vaccines need to be produced in large quantities and ...
    • Brought by Degrees: A Focus on the Current Indicators of Lean ‘Smartness’ in Smart Cities 

      Collins, Dave; Johansen, Agnar; Kalsaas, Bo Terje; Temeljotov Salaj, Alenka; Hamdy, Mohamed (Chapter; Bokkapittel, 2021)
      The purpose of this paper is to look at the indicators to which a city can be considered to be a smart city based upon the degree it meets specific indicators within the categories of ‘Social Smartness’, ‘Technological Smartness’ and ‘Environmental Smartness’. The data collection for this paper was conducted through desk research in academic and non academic articles and publications that focus on ...
    • Cable Propelled Gondola System Operation in Icing Conditions 

      Azad, Zeeshan; Virk, Muhammad Shakeel (Journal article; Tidsskriftartikkel; Peer reviewed, 2022-06-30)
      The scope of this study comprehends problems associated with modern urban vehicles known as cable propelled gondolas system operations in icing conditions. The aspects under consideration are problems related to the operations, safety, and maintenance of cable car systems in harsh climate conditions. The geographical location of the gondola cars makes them vulnerable to severe weather conditions ...
    • A Carbon-Constrained Stochastic Optimization Model with Augmented Multi-Criteria Scenario-Based Risk-Averse Solution for Reverse Logistics Network Design under Uncertainty 

      Yu, Hao; Solvang, Wei Deng (Journal article; Peer reviewed; Tidsskriftartikkel, 2017-07-10)
      With the increase of the concern from the public for environmental pollution and waste of resources, the value recovery through reuse, repair, remanufacturing and recycling from the end-of-use (EOU) and end-of-life (EOL) products have become increasingly important. Reverse logistics is the process for capturing the remaining value from the EOU and EOL products and also for the proper disposal of the ...
    • A case study to estimate thermal conductivity of ABS in Cold Climate Chamber 

      Mughal, Umair Najeeb; Makarova, Marina; Virk, Muhammad Shakeel; Polanco Pinerez, Geanette (Journal article; Peer reviewed; Tidsskriftartikkel, 2015-10-22)
      Non steady state thermal conductivity of ABS was estimated using an analytical approach in a Cold Climate Chamber at ?10?C and ?14?C. Two hollow cylinders of ABS of varying thickness were used to estimate the conductivity. The material was porous but the porosity was unknown. This paper is a case study to understand, if it is reasonable to estimate the thermal conductivity using the analytical varying ...
    • Case study: Optimization of End-of-line Packaging in Fishery Industry 

      Sziebig, Gabor; Kerezovic, Tanja (Peer reviewed; Bokkapittel; Chapter, 2016)
      Application of automation in SMEs working in fish industry is not in advanced state as in other fields of production and manufacturing industries. Due to expensive equipment, high labor costs of engineers required to implement such features into production lines, and low-quantity contracts, introduction of automation technologies is in large part of these companies is absent. This paper analyses ...
    • Charge Transfer Scheme for Atmospheric Ice Sensing 

      Mughal, Umair Najeeb; Virk, Muhammad Shakeel; Rashid, Taimur (Peer reviewed; Journal article; Tidsskriftsartikkel, 2015-01-31)
      The atmospheric icing parameters are being measured nowadays with the aid of more customized yet limited commercial equipment. The parameters include atmospheric ice detection, icing load and icing rate. The robustness of such equipment is usually under scrutiny when it comes to cold/harsh environment operations. This phenomenon was experienced consistently by the atmospheric Icing Research Team at ...
    • A Co-Scheduling Problem of Ship Lift and Ship Lock at the Three Gorges Dam 

      Zhao, Xu; Lin, Qianjun; Yu, Hao (Journal article; Tidsskriftartikkel; Peer reviewed, 2020-07-16)
      Due to the unprecedentedly increasing demands of waterway transportation on the Yangtze River during the latest years, traffic congestion at the Three Gorges Dam (TGD) has becoming a serious problem. In busiest seasons, a vessel may need to wait up to 3 days for passing the TGD via the ship lift or the five-stage ship lock. In order to improve the navigation efficiency and the utilization of passing ...
    • Collaboration with High-Payload Industrial Robots: Simulation for Safety 

      Shu, Beibei; Sziebig, Gabor (Journal article; Tidsskriftartikkel; Peer reviewed, 2018-12-15)
      <p>When operators and industrial robots are sharing the same task, there are multiple factors, which effect if a system is safe for the human operator or not. In general this is solved by introducing Collaborative Robot for cooperation, but what happens when we would extend our already existing production facilities with newer comfort features?</p> <p>In this paper we propose to include industrial ...
    • Common Educational Teleoperation Platform for Robotics Utilizing Digital Twins 

      Kaarlela, Tero; Arnarson, Halldor; Pitkäaho, Tomi; Shu, Beibei; Solvang, Bjørn; Pieskä, Sakari (Journal article; Tidsskriftartikkel; Peer reviewed, 2022-07-18)
      The erratic modern world introduces challenges to all sectors of societies and potentially introduces additional inequality. One possibility to decrease the educational inequality is to provide remote access to facilities that enable learning and training. A similar approach of remote resource usage can be utilized in resource-poor situations where the required equipment is available at other premises. ...
    • A Comparison of Two Location Models in Optimizing the Decision-making on the Relocation Problem of Post Offices at Narvik, Norway 

      Yu, Hao; Solvang, Wei Deng (Peer reviewed; Book; Chapter, 2018)
      Since 2013, the postal service provider in Norway: Posten has implemented a new strategic plan to close their large post offices across the country for improving the cost and operational efficiency. Instead, with the cooperation with large retailers, the local postal service is provided at the Posten sub-branches at some supermarkets. In this paper, an optimization problem for relocating the post ...
    • Computationally efficient approximate dynamic programming for multi-site production capacity planning with uncertain demands 

      Chen-Yang, Cheng; Pourhejazy, Pourya; Tzu-li, Chen (Journal article; Tidsskriftartikkel; Peer reviewed, 2022-07-05)
      With globalization and rapid technological-economic development accelerating the market dynamics, consumers' demand is becoming more volatile and diverse. In this situation, capacity adjustment as an operational strategic decision plays a major role to ensure supply chain responsiveness while maintaining costs at a reasonable norm. This study contributes to the literature by developing computationally ...
    • Conceptual design of cost-effective ice detection system based on infrared thermography 

      Adeel, Yousuf; Khawaja, Hassan; Virk, Muhammad Shakeel (Journal article; Tidsskriftartikkel; Peer reviewed, 2023-06-30)
      Ice accretion has been a persisting issue in cold regions and poses a threat to both onshore and offshore infrastructure, especially to sensitive equipment and personnel safety. Thermal infrared imaging (thermography) can be used as a non-destructive, non-invasive technique to determine the presence and thickness of ice over a surface. This paper presents early-stage experiment results with a FLIR® ...
    • Conceptual Design of Ice Detection/Mitigation System Based on Infrared Thermography 

      Adeel, Yousuf; Khawaja, Hassan; Virk, Muhammad Shakeel (Conference object; Konferansebidrag, 2022)
      Ice accretion has been a persisting issue in cold regions and poses a threat to onshore and offshore infrastructure, especially to sensitive equipment and personnel safety. Thermal infrared imaging (thermography) can be used as a non-destructive, non- invasive technique to determine the presence and thickness of ice over a surface. The paper presents early-stage experiment results with a FLIR® Lepton ...
    • Customizing Smart Warehouse Management for Large Scale Production Industries 

      Khan, Natalia Batool; Solvang, Wei Deng; Yu, Hao (Chapter; Bokkapittel, 2023-05-23)
      Rapid changes in the level of digitalization have changed manufacturing and production industries during our lifetime. Several industries have explored the extent to which these changes can be utilized to optimize supply chain processes and increase sustainability – they have achieved success in implementation. The energy industry, being one of the world’s largest and most financially consuming ...
    • A DEA-based decision analytics framework for product deletion in the luxury goods and fashion industry 

      Pourhejazy, Pourya; Thamachutha, Patcharaporn; Namthip, Tago-in (Journal article; Tidsskriftartikkel; Peer reviewed, 2021-12-13)
      Traditionally, product deletion is a reactive decision driven by low sales volume and profit margin. However, the complexities involved in product management and consumer behavior volatilities make it necessary to account for a broad range of financial and non-financial factors. Besides, proactive product deletion may be required for a company to reduce the risk of draining resources, adjust to the ...
    • A decision-support model for operational planning of surface coal mining considering equipment failure 

      Yu, Hao; Solvang, Wei Deng; Sun, Xu (Konferansebidrag; Conference object, 2016)
      This paper presents a decision-support model aiming, primarily, at maximizing the productivity of surface coal mining activities through operational planning and management. The model is formulated based upon mixed integer programming, and it determines the optimal production plan of the shovels and allocation plan of the haul trucks in order to minimize operational cost, fuel consumption as well ...
    • Delving Into the Interdependencies in the Network of Economic Sustainability Innovations 

      Badri Ahmadi, Hadi; Pourhejazy, Pourya; Moktadir, Md. Abdul; Dwivedi, Ashish; Liou, James J. H. (Journal article; Tidsskriftartikkel; Peer reviewed, 2023-03-23)
      Legislative pressures and public awareness are urging companies to foster sustainability innovations that improve business operations. Limited studies explored the underpinnings of the economic dimension of sustainability innovations; studying economic innovation criteria in the manufacturing sector of emerging economies can inform other industries while recession fears loom the financial prospects. ...
    • Developing a Toolbox of supports for small and medium sized manufacturing companies 

      Moore, John; Loughran, Anne; McCusker, Edel; Solvang, Wei Deng; Sziebig, Gabor; Yu, Hao; Ericson, Åsa; Holmqvist, Johann; Wenngren, Johann; Pieskä, Sakari; Vahasoyrinki, Juoni; Kaartinen, Heidi (Konferansebidrag; Conference object, 2016)
      TARGET is a collaborative project involving a partnership of universities and institutes of higher education in UK, Ireland, Norway, Finland and Sweden. The project will develop tools to enhance capacity in regional manufacturing companies to adapt and embrace new technologies and innovation. This is to be done in collaboration with small/medium sized manufacturing engineering companies - developing, ...