Vis enkel innførsel

dc.contributor.authorStange, Even
dc.contributor.authorAndleeb, Zahra
dc.contributor.authorKhawaja, Hassan
dc.date.accessioned2020-01-22T12:09:37Z
dc.date.available2020-01-22T12:09:37Z
dc.date.issued2019
dc.description.abstractIn this work, the IR thermography was used to study the steel specimens (DIN 50125 Standard) undergoing the tensile tests. The tensile tests were performed using GUNT® Hamburg Universal Material Tester. The tensile specimens were clamped, and the test force was applied using a hand-operated hydraulic system. A dial gauge measured the elongation of the specimens. Using the WP 300.20 system for data acquisition, the measured values for force and displacement were recorded in a PC. The IR thermographic imaging was performed using the FLIR® T1030sc IR camera and ResearchIR Max software. The steel specimens were coated with high emissivity paint. The tests revealed that the steel specimens show noticeable thermal signature when undergoing tensile loading.en_US
dc.identifier.citationStange, E., Andleeb, Z., Khawaja, H.A. (2019) Qualitative visualization of the development of stresses through infrared thermography. <i> MSTU Vestnik, 22 </i>4, 503-507.en_US
dc.identifier.cristinIDFRIDAID 1705078
dc.identifier.doi10.21443/1560-9278-2019-22-4-503-507
dc.identifier.issn1560-9278
dc.identifier.issn1997-4736
dc.identifier.urihttps://hdl.handle.net/10037/17171
dc.language.isoengen_US
dc.publisherMurmansk State Technical University (MSTU)en_US
dc.relation.journalВестник МГТУ
dc.rights.accessRightsopenAccessen_US
dc.rights.holder© 1998—2019 MSTUen_US
dc.titleQualitative visualization of the development of stresses through infrared thermographyen_US
dc.type.versionpublishedVersionen_US
dc.typeJournal articleen_US
dc.typePeer revieweden_US


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel