Show simple item record

dc.contributor.advisorJacobsen, Svein Ketil
dc.contributor.authorHeiskel, Bendik
dc.date.accessioned2021-02-11T18:05:55Z
dc.date.available2021-02-11T18:05:55Z
dc.date.issued2020-12-14en
dc.description.abstractThe largest hurdle in full duplex wireless systems is the self-interference introduced by the transmitted signal into the received signal. In multi antenna systems this interference is caused by the direct coupling between the transmitting and receiving antennas. In systems where the transmitter and receiver uses the same antenna the interference is caused by inadequate isolation between the transmitter and receiver front-ends. In most systems the transmitted power is orders of magnitude higher than the received signal power. This causes the interference to saturate the receiver and can damage the receiver. One way of reducing this interference is to include a filter in the microwave front-end. This filter uses the transmitted signal to generate an inverse of the interference and adds it to the receiver signal path. In this thesis a multi-tap self-interference cancellation filter is designed, optimized and fabricated. The filter parameters are optimized using the basin-hopping algorithm combined with the Nelder-Mead downhill simplex algorithm. The filter is a multi-tap filter, where each tap contains phase shift, attenuation and delay elements. The filter is experimentally verified to reduce the self interference by 10.45 dB over a frequency band from 1GHz to 3GHz.en_US
dc.identifier.urihttps://hdl.handle.net/10037/20561
dc.language.isoengen_US
dc.publisherUiT Norges arktiske universitetno
dc.publisherUiT The Arctic University of Norwayen
dc.rights.holderCopyright 2020 The Author(s)
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/4.0en_US
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)en_US
dc.subject.courseIDFYS-3941
dc.subjectVDP::Mathematics and natural science: 400::Physics: 430::Electromagnetism, acoustics, optics: 434en_US
dc.subjectVDP::Matematikk og Naturvitenskap: 400::Fysikk: 430::Elektromagnetisme, akustikk, optikk: 434en_US
dc.subjectVDP::Mathematics and natural science: 400::Physics: 430::Electronics: 435en_US
dc.subjectVDP::Matematikk og Naturvitenskap: 400::Fysikk: 430::Elektronikk: 435en_US
dc.subjectVDP::Technology: 500::Electrotechnical disciplines: 540::Electronics: 541en_US
dc.subjectVDP::Teknologi: 500::Elektrotekniske fag: 540::Elektronikk: 541en_US
dc.titleWideband Self-Interference Cancellation Using Multi-Tap Filter in Radar Front Enden_US
dc.typeMastergradsoppgavenor
dc.typeMaster thesiseng


File(s) in this item

Thumbnail
Thumbnail

This item appears in the following collection(s)

Show simple item record

Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)