Viser treff 262-281 av 310

    • Security of Supply: A National or European Competence? 

      Tuominen, Tomi; Halonen, Kirsi-Maria; Salminen, Mirva Miia Tuulikki (Journal article; Tidsskriftartikkel; Peer reviewed, 2023-10-16)
      Security of supply refers to governmental policies that aim to secure the availability of critical products at all times. The COVID-19 pandemic brought to fore the importance of such policies, as suddenly there was an overwhelming need for critical medical supplies that the markets were not able to fulfil. Following the pandemic, the EU has started to construct its own security of supply policy, ...
    • Selecting technological alternatives for regulatory compliance towards emissions reduction from shipping: An integrated fuzzy multi-criteria decision-making approach under vague environment 

      Bui, Khanh Q.; Ölçer, Aykut I.; Kitada, Momoko; Ballini, Fabio (Journal article; Tidsskriftartikkel; Peer reviewed, 2021-02-01)
      Due to the increasing pressure from stricter environmental regulations to reduce emissions in shipping, the maritime industry has been striving for finding more effective measures. Existing measures are often not enough to comply with new regulations. Among various alternative measures, it is not easy for decision-makers (shipowners and operators) to choose the most suitable alternative measure as ...
    • Selection of a high performance alloy for gas turbine blade using multiphysics analysis 

      Khawaja, Hassan Abbas; Moatamedi, Mojtaba (Journal article; Tidsskriftartikkel; Peer reviewed, 2014-04-03)
      With the extensive increase in the utilization of energy resources in the modern era, the need of energy extraction from various resources has pronounced in recent years. Thus comprehensive efforts have been made around the globe in the technological development of turbo machines where means of energy extraction is energized fluids. This development led the aviation industry to power boost due to ...
    • Sensitivity analysis of the SWAT model to spatial distribution of precipitation in streamflow simulation in an Arctic watershed 

      Bui, Minh Tuan; Lu, Jinmei; Nie, Linmei (Journal article; Tidsskriftartikkel; Peer reviewed, 2020-12-04)
      This study approached a physically based, semi-distributed SWAT model to test the model sensitivity to the spatial distribution of precipitation. Ten scenarios of precipitation from five scattered rain gauges in an Arctic watershed Målselv in northern Norway were used as inputs to run the SWAT model. Streamflows were simulated. The model runs at monthly time interval based on the historical data of ...
    • Ship behavior prediction via trajectory extraction-based clustering for maritime situation awareness 

      Murray, Brian; Perera, Lokukaluge Prasad (Journal article; Tidsskriftartikkel; Peer reviewed, 2021-03-20)
      This study presents a method in which historical AIS data are used to predict the future trajectory of a selected vessel. This is facilitated via a system intelligence-based approach that can be subsequently utilized to provide enhanced situation awareness to navigators and future autonomous ships, aiding proactive collision avoidance. By evaluating the historical ship behavior in a given geographical ...
    • Ship Performance and Navigation Data Compression and Communication under Autoencoder System Architecture 

      Perera, Lokukaluge Prasad; Mo, Brage (Journal article; Tidsskriftartikkel; Peer reviewed, 2018-04-21)
      Modern vessels are designed to collect, store and communicate large quantities of ship performance and navigation information through complex onboard data handling processes. That data should be transferred to shore based data centers for further analysis and storage. However, the associated transfer cost in large-scale data sets is a major challenge for the shipping industry, today. The same cost ...
    • Ship Performance and Navigation Information under High Dimensional Digital Models 

      Perera, Lokukaluge Prasad; Mo, Brage (Journal article; Tidsskriftartikkel; Peer reviewed, 2019-03-04)
      Future vessels will be facilitated by modern internet of things to collect various ship performance and navigation information. Such information is collected as large-scale data sets, the so-called Big Data, that should be utilized towards digitalization of the shipping industry. However, various data handling challenges are encountered by the shipping industry during the phase of digitalization, ...
    • Ship speed power performance under relative wind profiles in relation to sensor fault detection 

      Perera, Lokukaluge Prasad; Mo, Brage (Journal article; Tidsskriftartikkel; Peer reviewed, 2018-11-19)
      Statistical Data analysis and visualization approaches to identify ship speed power performance under relative wind (i.e. apparent wind) profiles are considered in this study. Ship performance and navigation data of a selected vessel are analyzed, where various data anomalies, i.e. sensor related erroneous data conditions, are identified. Those erroneous data conditions are investigated and several ...
    • Shipping oil from the Russian Arctic: Past experiences and future prospects 

      Bambulyak, Alexei; Sydnes, Are K.; Milakovic, Aleksandar-Sasa; Frantzen, Bjørn (Journal article; Tidsskriftartikkel; Peer reviewed, 2015-06)
      Transport of oil from Russian Arctic ports to Western markets was insignificant prior to 2002. In 2002, there was a major surge, with 5 million tonnes delivered westwards through the Barents Sea. By 2004, this had increased to 12 million tonnes. Since then, annual volumes have been on levels between 9 and 15 million tonnes. In the near future, the flow of oil cargo in the Arctic may rise ...
    • Shock Tube. Detail overview of equipment and instruments in the shock tube experimental setup 

      Khawaja, Hassan Abbas; Kapaya, Juma; Moatamedi, Mojtaba (Book; Bok, 2015)
      The shock tube is a device in which a normal shock wave is produced by the interaction of fluids at significantly high-pressure difference. The shock tube is comprised of two sections known as driver and driven sections. These two sections are interacted with the high-speed valve or a bursting disc. When the interaction happens, a shock wave forms almost instantaneously and propagates into the driven ...
    • Simulation of peak tension loads in Subsea power cables during installation 

      Okkerstrøm, Lene; Gudmestad, Ove Tobias; Pedersen, Egil (Journal article; Tidsskriftartikkel; Peer reviewed, 2021)
      At present, most of the insurance claims in the offshore wind industry are due to cable failures where a large percentage occurs during the installation of the array and export cables. As the reliability of the cables depends on the location and installation method, it is important to map the risks involved, which can compromise the cable's integrity in individual projects. This paper presents ...
    • An Slow Motion Detection Algorithm using High Order Statistic Approach 

      Yuan, Fuqing; Lu, Jinmei (Journal article; Tidsskriftartikkel; Peer reviewed, 2021-03-16)
      Motion detection is vital for consumer electronics and the Internet of things (IOT). For a scenario where the motion is slow and gentle, the resolution of the motion sensor is critical for the detection, while the algorithm development is another critical issue to differentiate the motion signal from noise measurement. This paper investigates the feasibility of using higher order statistics ...
    • Solution of Pure Scattering Radiation Transport Equation using Finite Difference Method 

      Khawaja, Hassan Abbas (Conference object; Konferansebidrag, 2016-12)
      Radiative transfer is the physical phenomenon of energy transfer in the form of electromagnetic radiation. The propagation of radiation through a medium is affected by absorption, emission, and scattering processes. Equations of radiative transfer have application in a wide variety of subjects including optics, astrophysics, atmospheric science, and remote sensing. Analytic solutions to the radiative ...
    • Spare Part Management Considering Risk Factors 

      Barabadi, Reza; Ataei, Mohammad; Khalokakaie, Reza; Barabadi, Abbas; Nouri, ali (Journal article; Tidsskriftartikkel; Peer reviewed, 2022-01-01)
      The spare parts provision is a complex process, which needs a precise model to analyze all factors with their possible effects on the required number of spare parts. The required number of spare parts for an item can be calculated based on its reliability performance. Various factors can influence the reliability characteristics of an item, including operational environment, maintenance policy, ...
    • Spare Part Transportation Management in High North 

      Ayele, Yonas Zewdu; Barabadi, Abbas; Markeset, Tore (Journal article; Tidsskriftartikkel; Peer reviewed, 2013)
      The demanding physical conditions of the Arctic, remote location, and uncertainty regarding the travel time can both heighten the challenges related to transportation of spare part in the region. Managing to get the appropriate path for transportation of spare parts for oil and gas industries in the region, is one of the major and demanding tasks. In this paper we develop the concept of ...
    • Spatiotemporal patterns of particulate matter (PM) and associations between PM and mortality in Shenzhen, China 

      Zhang, Fengying; Liu, Xiaojian; Zhou, Lei; Yu, Yong; Wang, Li; Lu, Jinmei; Wang, Wuyi; Krafft, Thomas (Peer reviewed; Journal article; Tidsskriftsartikkel, 2016-03-02)
      Background: Most studies on air pollution exposure and its associations with human health in China have focused on the heavily polluted industrial areas and/or mega-cities, and studies on cities with comparatively low air pollutant concentrations are still rare. Only a few studies have attempted to analyse particulate matter (PM) for the vibrant economic centre Shenzhen in the Pearl River Delta. ...
    • Spray Icing on ONEGA Vessel- A Comparison of Liquid Water Content Expressions 

      Dhar, Sushmit; Samuelsen, Eirik Mikal; Naseri, Masoud; Aarsæther, Karl Gunnar; Edvardsen, Kåre (Journal article; Tidsskriftartikkel, 2022)
      The hazards associated with ice accretion primarily due to impinging freezing sea spray on ship structures are considered among serious safety concerns for ships operating in the colder regions. An accurate sea-spray icing-estimation model to evaluate the ice accumulation during operations in these regions can make marine operations safer. The accuracy of the present icing models for estimating icing ...
    • Stability of Vessels in an Ice-free Arctic 

      Johansen, Kåre; Sollid, Magne-Petter; Gudmestad, Ove Tobias (Journal article; Tidsskriftartikkel; Peer reviewed, 2020-09)
      One consequence of the declining ice cover in the Arctic is increased areas of open seas. These new open sea areas lead to some challenging aspects related to ship stability. Longer fetch lengths, associated with build-up of larger waves followed by increased conditions for sea spray icing on vessels is one aspect. Open seas in combination with cold atmospheric temperatures is a prerequisite for ...
    • Study of Acoustics Properties of SK One Component Polyurethane and its Application in Arctic Marine Structures 

      Xue, Hui; Khawaja, Hassan Abbas; Moatamedi, Mojtaba; Sun, Zhiheng; Souli, Mhmed (Conference object; Konferansebidrag, 2016-12-08)
      Marine noise reduction tends to be challenging and requires a comprehensive engineering approach. The soundproofing materials for marine noise reduction are usually exposed to high temperatures, potential fluid or oil spills, engine maintenance and a high airflow environment. This work looks into the acoustic proofing properties of a non-toxic material ‘SK One Component Polyurethane’ developed by ...
    • Study of CRFP Shell Structures under Dynamic Loading in Shock Tube Setup 

      Khawaja, Hassan Abbas; Bertelsen, Tommy; Andreassen, Roar; Moatamedi, Mojtaba (Journal article; Tidsskriftartikkel; Peer reviewed, 2014-12-04)
      The paper gives the study of the response of carbon fiber reinforced polymers (CRFP) quasi-isotropic shell structures under the influence of dynamic loading. The quasi-isotropic CRFP shell specimens are fabricated using Multipreg E720 laminates. These laminates are laid in such a way that shell structure has equal strength and mechanical properties in the two-dimensional (2D) plane and hence can be ...