Vis enkel innførsel

dc.contributor.authorCavalcante, Carolina
dc.contributor.authorde Jesus Costa, Juliana
dc.contributor.authorLagoeiro, Leonardo
dc.contributor.authorFossen, Haakon
dc.contributor.authorLee, Amicia
dc.contributor.authorArchanjo, Carlos
dc.contributor.authorVizeu, Roberto
dc.date.accessioned2022-10-07T08:31:09Z
dc.date.available2022-10-07T08:31:09Z
dc.date.issued2022-09-01
dc.description.abstractWe combine quartz textural analysis with Titanium-in-quartz (TitaniQ) geothermometry to investigate the late stages of deformation in mylonitic rocks from the Sucuru dike swarm in the Borborema Province. The wide range in TitaniQ temperatures (>340 to 740 °C) closely related to grain sizes are attributed to inefficient Ti resetting during bulging (BLG) and subgrain rotation (SGR) recrystallization. The highest temperature values (>500–740 °C) occur in the core of quartz ribbons and porphyroclasts. They are interpreted as the record of early-stage plastic deformation, likely during the intrusion of magmatic bodies, and are progressively overprinted during a lower-temperature stage (>340–500 °C) associated with intense dynamic recrystallization and production of a large amount of fine-grained matrix. The dominantly weak crystallographic preferred orientations (CPOs) can be attributed to a large variety in crystallographic orientations of parent grains, which control to a large extent the CPO evolution of daughter grains, and to activation of multiple slip systems in the direction (basal, rhomb and prism) due to synkinematic temperature decrease. The CPOs are consistent with strain localized by operation of dislocation creep-accommodated grain boundary sliding (DisGBS) during the low-temperature stage. DisGBS seems to be less important in coarse pure quartz domains, where moderate to strong CPOs indicate the dominance of dislocation creep. Several evidence of intracrystalline deformation in quartz ribbons and porphyroclasts point to dominant activation of dislocation creep at the early high-temperature stage of deformation, with activation of prism. The dike orientations, geometry and evidence of solid-state deformation in their margins, fit well with progressive E-W dextral shearing, where they intrude and crystallize in a NW-SE direction and rotate clockwise during shearing. This implies that the dextral shear regime that dominated the Borborema province from ca. 600 Ma was still in effect into the Cambrian some 60–70 million years later.en_US
dc.identifier.citationCavalcante, de Jesus Costa, Lagoeiro, Fossen, Lee, Archanjo, Vizeu. TitaniQ temperatures and textural analysis as a record of the deformation history in a major continental shear zone system, Borborema Province, Brazil. Tectonophysics. 2022;841en_US
dc.identifier.cristinIDFRIDAID 2057473
dc.identifier.doi10.1016/j.tecto.2022.229548
dc.identifier.issn0040-1951
dc.identifier.issn1879-3266
dc.identifier.urihttps://hdl.handle.net/10037/26997
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.relation.journalTectonophysics
dc.relation.projectIDUiT Norges arktiske universitet: 304979/2016-3en_US
dc.relation.projectIDUiT Norges arktiske universitet: 425412/2018-0en_US
dc.relation.projectIDUiT Norges arktiske universitet: 305232/2018-5en_US
dc.relation.projectIDUiT Norges arktiske universitet: 434202/2018-5en_US
dc.relation.projectIDUiT Norges arktiske universitet: 310677en_US
dc.rights.accessRightsopenAccessen_US
dc.rights.holderCopyright 2022 The Author(s)en_US
dc.rights.urihttps://creativecommons.org/licenses/by/4.0en_US
dc.rightsAttribution 4.0 International (CC BY 4.0)en_US
dc.titleTitaniQ temperatures and textural analysis as a record of the deformation history in a major continental shear zone system, Borborema Province, Brazilen_US
dc.type.versionacceptedVersionen_US
dc.typeJournal articleen_US
dc.typeTidsskriftartikkelen_US
dc.typePeer revieweden_US


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution 4.0 International (CC BY 4.0)
Med mindre det står noe annet, er denne innførselens lisens beskrevet som Attribution 4.0 International (CC BY 4.0)