Show simple item record

dc.contributor.advisorMauseth, Guy
dc.contributor.authorBjørk, Erlend
dc.date.accessioned2024-07-18T05:39:53Z
dc.date.available2024-07-18T05:39:53Z
dc.date.issued2023-05-22en
dc.description.abstract3D-printing of polymers come in a large variety of methods and materials, each configuration with its own strengths and weaknesses. To compute and estimate mechanical properties of 3D-printed parts, good knowledge to the geometry of the internal structures is important to obtain. This will vary between different printers and slicers. As 3D-printed parts are anisotropic, it is often challenging to estimate their mechanical properties. To achieve a deeper understanding of this matter, an empiric approach of printing and testing specimens with different internal structures, will be one objective of this thesis. The results will be compared to both traditional calculation of mechanical strength in isotropic materials, as well as to results from a state-of-the-art study carried out in this thesis.en_US
dc.identifier.urihttps://hdl.handle.net/10037/34156
dc.language.isoengen_US
dc.publisherUiT Norges arktiske universitetno
dc.publisherUiT The Arctic University of Norwayen
dc.rights.holderCopyright 2023 The Author(s)
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/4.0en_US
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)en_US
dc.subject.courseIDEND-3900
dc.titleStudy of 3D printed polymer structures and geometries The impact of raster angle configurations on mechanical propertiesen_US
dc.typeMaster thesisen
dc.typeMastergradsoppgaveno


File(s) in this item

Thumbnail
Thumbnail

This item appears in the following collection(s)

Show simple item record

Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)