Vis enkel innførsel

dc.contributor.authorXue, Hui
dc.contributor.authorKhawaja, Hassan Abbas
dc.date.accessioned2016-09-26T07:27:56Z
dc.date.available2016-09-26T07:27:56Z
dc.date.issued2016-08-29
dc.description.abstractThis paper presents the FEM technique applied in the study of ice separation over a polyvinyl chloride (PVC) surface. A two layer model of ice and PVC is analysed theoretically using Euler-Bernoulli beam theory and the rule of mixtures. The physical samples are prepared by freezing ice over the PVC surfaces. The samples are tested experimentally in a four-point loading setup. The experimental results contain strain data gathered through a data acquisition system using the LabView software. The data is collected at the rate of 1 kHz per load step. A model is also coded in MATLAB® and simulated using the finite element method (FEM) in ANSYS® Multiphysics. The FEM model of the ice and PVC sample is built using solid elements. The mesh is tested for sensitively. A good agreement is found between the theoretical, experimental and numerical simulation results.en_US
dc.descriptionPublisher's version, source: <a href=http://dx.doi.org/10.21152/1750-9548.10.3.247>http://dx.doi.org/10.21152/1750-9548.10.3.247</a>.en_US
dc.identifier.citationThe International Journal of Multiphysics 2016, 10(3):247-264en_US
dc.identifier.cristinIDFRIDAID 1376277
dc.identifier.doihttp://dx.doi.org/10.21152/1750-9548.10.3.247
dc.identifier.issn1750-9548
dc.identifier.urihttps://hdl.handle.net/10037/9749
dc.language.isoengen_US
dc.publisherInternational Society of Multiphysicsen_US
dc.relation.urihttp://journal.multiphysics.org/index.php/IJM/article/view/79
dc.rights.accessRightsopenAccess
dc.subjectVDP::Teknologi: 500::Materialteknologi: 520en_US
dc.titleInvestigation of Ice-PVC separation under Flexural Loading using FEM Analysisen_US
dc.typeJournal articleen_US
dc.typeTidsskriftartikkelen_US
dc.typePeer revieweden_US


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel