Show simple item record

dc.contributor.authorJi, Hongjuan
dc.contributor.authorMustafa, Mohamad
dc.contributor.authorKhawaja, Hassan Abbas
dc.contributor.authorEwan, Bruce C.
dc.contributor.authorMoatamedi, Mojtaba
dc.date.accessioned2016-01-13T11:57:59Z
dc.date.available2016-01-13T11:57:59Z
dc.date.issued2014-04-15
dc.description.abstractThis paper presents design considerations for a shock tube experimental rig used to investigate the dynamic failure mechanisms of shell geometries subjected to water shock impact loading. In such setup, it is desirable that the drive pressure used within the tube can provide a wide range of impulsive loads on the test structures and some flexibility can be achieved on the applied pulse durations. With this aim a review of various existing shock tube experimental setup is presented and choices are made based on scientific merits. Finally design parameters are drawn for right set of conditions required for the experiments.en_US
dc.identifier.citationWorld Journal of Engineering 11(2014) nr. 1 s. 55-60en_US
dc.identifier.cristinIDFRIDAID 1132705
dc.identifier.doi10.1260/1708-5284.11.1.55
dc.identifier.issn1708-5284
dc.identifier.urihttps://hdl.handle.net/10037/8387
dc.identifier.urnURN:NBN:no-uit_munin_7949
dc.language.isoengen_US
dc.publisherMulti-Science Publishingen_US
dc.rights.accessRightsopenAccess
dc.subjectVDP::Teknologi: 500::Materialteknologi: 520en_US
dc.titleDesign of water shock tube for testing shell materialsen_US
dc.typeJournal articleen_US
dc.typeTidsskriftartikkelen_US
dc.typePeer revieweden_US


File(s) in this item

Thumbnail
Thumbnail

This item appears in the following collection(s)

Show simple item record