Vis alle innførsler i samlingen sortert på


Nye registreringer

  • Sustainable supply chain management for blue economics in Northern Norway 

    Sandåker, Anders (Master thesis; Mastergradsoppgave, 2018-06-01)
    In the first part of thesis, there was conducted a literature review of production and the supply chain with regards to fish farming, existing technologies, together with the potential of alternative digital technology. In the second part, a case study of a relevant manufacturer who is involved in all the aspects of the value chain was carried out to gain insight into relevant supply chain ...
  • Logistic Service at Ports in Northern Norway. Case Study of the Port of Narvik 

    Knapskog, Knut Arthur (Master thesis; Mastergradsoppgave, 2018-06-01)
    This thesis is a part of the Master of Science degree in Industrial Engineering at the University of Tromsø – The arctic University of Norway, Campus Narvik. The aim of this thesis is to improve the logistic service and increase the competitiveness of ports in Northern Norway in order to attract more port users. A literature review on the topics of logistics in seaports is presented, along with an ...
  • Large-Scale Additive Manufacturing Machine 

    Plotnikov, Dmitri (Master thesis; Mastergradsoppgave, 2018-08-21)
    This master thesis contains an overview of the additive manufacturing technology and building process of the large-scale Fused Deposition Modelling (FDM) additive manufacturing machine from the old Wafer Handling Diffusion machine. The thesis study is mainly focused on practical work and describes the techniques used during the project execution. The built machine can print large 3D prototypes from ...
  • Principle of functioning of smart solution to clean high power lines in cold climate. 

    Caicedo Espinoza, Edison Hover (Master thesis; Mastergradsoppgave, 2018-06-01)
    Dependency of human activities on electricity supply goes from emergency services to comfort aspects. Reliability of electricity distribution systems is a complex problem to tackle, especially when the systems are located at cold climate regions, dealing with ice accretion on the elements of the electrical systems and its consequences become a priority to be included in maintenance maneuvers in order ...
  • Design of experimental loop to demonstrate pigging activity 

    Makarova, Marina (Master thesis; Mastergradsoppgave, 2017-06-14)
    Our world is continuously developing by new generation of engineers, artists, politicians, travelers and this list can be continued. They will research, improve and design new reality for the future. One of our missions is to help them by bringing better understanding of existing technologies. This is the goal of my thesis: to create an experimental loop to demonstrate pigging activity in the ...
  • A Business Model for Small and Medium-Sized Manufacturers (SMEs) in Sparsely Populated Areas in Northern Norway 

    Liu, Jiawen (Master thesis; Mastergradsoppgave, 2017-06-14)
    As Northern Norway is considered as a low population density area with small and dispersed settlement structures, dispersed economic foundation with simplification, and focus on primary production. Manufacturing firms in Northern Norway are predominantly Small and Medium-Sized Enterprise (SMEs). With the development of globalization and the industry 4.0 trends, manufacturing industry focus more on ...
  • Design of a pipeline flexibility bench 

    Ghani, Rizwan (Master thesis; Mastergradsoppgave, 2017-08-15)
    In this thesis “Design of pipeline flexibility bench” an exertion has been made to make a conclusive study of fluid flow through pipe. Analysis has been carried out using analytical and numerical approach, where advance computer aided engineering tools such as CFD & FEM approach is used to study the flow behavior in different pipe configurations. Results show a significant change in wall shear stress ...
  • Improving the performance of service network through location-based optimization and analysis. A case study on postal service in a city in Northern Norway 

    Yang, Shuo (Master thesis; Mastergradsoppgave, 2017-08-15)
    Everyone needs to be served, and a service network provides a set of services and/or help to please the people involved. No matter who is the service provider, government or retailer, there always been a clash between them and customers. Service providers are trying their best to serve customers as many as possible with a limitation of cost, while the satisfaction of customer might be neglected at ...
  • Development of small-scale intelligent manufacturing system (SIMS). A case study at Stella Polaris AS 

    Huang, Taoying (Master thesis; Mastergradsoppgave, 2017-06-14)
    Manufacturers in the resourceful Northern Peripheral and Arctic (NPA) region are mostly small and medium-sized enterprises (SMEs). Facing challenges primarily caused by the size and location of enterprises, these SMEs are constantly driven to take new measures to survive from the fierce competition against its domestic and international competitors, under the industrial environments of globalization ...
  • An improved approach for sustainable outsourcing strategy 

    Zheng, Yan (Master thesis; Mastergradsoppgave, 2017-06-14)
    In the modern business world, the trend that calls for a harmonious coexistence between economic development and the natural environment is growing ever stronger. Under such global context, the sustainability of a company has become more and more emphasized. As a crucial part of the supply chain management, the outsourcing process should as well be able to deal with such concerns under the guidance ...
  • Field data processing techniques 

    Balachin, Ivan (Master thesis; Mastergradsoppgave, 2017-06-14)
    The problem of global warming raised up interest to renewable energy. To reduce cost of wind energy is challenge. Before building of wind park such conditions like: average wind speed, direction, time for each wind, probability of icing. Also have to be considered amplitude of wind changes and their amount. This thesis presents Nygårdsfjellet wind turbine park data analysing for determining power ...
  • Wind resource assessment in cold climate regions 

    Jin, Jiayi (Master thesis; Mastergradsoppgave, 2017-06-14)
    Cold regions have good potential for wind energy development, but icing on wind turbines is recognize as a hindrance limiting the wind energy production in ice prone cold regions. This master thesis work is linked with Wind-CoE project of Arctic Technology Research Team and is aimed on better understanding of wind resource assessment in cold regions. Three years (2013-15) field SCADA data from ...
  • Transformation towards small-scale intelligent manufacturing system (SIMS). A case study of the workshop at UiT Narvik 

    Chai, Zhiwei (Master thesis; Mastergradsoppgave, 2017-06-14)
    With the development of increasing globalization of markets, the small and medium-sized enterprises (SMEs) are necessary to improve their innovation ability, and enhance their competitiveness in the global market. This project analyzes the global and region current situation of SMEs, and then provide the conclusion of advantages and challenges of SMEs, especially the sort of small manufacturing ...
  • Wireless industrial indoor localization and its application 

    Hu, Junsheng (Master thesis; Mastergradsoppgave, 2017-06-14)
    A complete, structural and comprehensive description of indoor localization technology is pre-sented in this paper. It concluded the basic techniques for distance measurement in indoor locali-zation, the basic localize principles, the topologies and algorithms which are often used in indoor localization area. Then how to perform indoor localization with sensors which are available in modern smartphones ...
  • Research on optimization of freeform surface operation 

    Liu, Dingjun (Master thesis; Mastergradsoppgave, 2017-06-14)
    Nowadays, many manufacturing companies need to face competition both in domestic and international level. Due to this circumstance, manufacturers recognize that one useful method to enhance their competence is reducing the lead-time of manufacturing. There are many researchers focused on minimize the time of actual cutting, tool path optimization and energy consumption optimization etc. However, few ...
  • Heavy multi-pass TIG welding 

    Maske, Tomas (Master thesis; Mastergradsoppgave, 2017-05-23)
    This study aims to find the maximum, usable, feed limit at different arc-energies and use the findings in multi-pass welding planning for robotic welding, taking into consideration the high controllability of robot movements. A combined studies using numerical analyses and practical experiments to calculate the feed limits for different arc energies. Each weld where analysed both mathematical, ...
  • Modeling and simulation of space debris distribution 

    Bredeli, Thomas Iversen (Master thesis; Mastergradsoppgave, 2013-07-01)
  • Aerodynamic Modeling and Estimation of a Fixed-wing UAV 

    Andersen, Tom Stian (Master thesis; Mastergradsoppgave, 2013-06-20)