Viser treff 139-158 av 163

    • Sound waves in fluidized bed using CFD–DEM simulations 

      Khawaja, Hassan Abbas (Journal article; Peer reviewed; Tidsskriftartikkel, 2017-10-16)
      The speed of sound waves is investigated using CFD-DEM numerical simulations. Appropriate initial and boundary conditions are applied to capture the phenomenon. The effect of varying the height of the bed is also studied. The results of the simulations matched those from literature. The pressure and particle velocity profiles from the simulation showed the oscillatory behavior. Functions (based on ...
    • State-of-the-art techniques in crack detection and utilizing innovative materials for the repair and maintenance of roads 

      Khawaja, Hassan (Conference object; Konferansebidrag, 2017)
      This work is looking into the issue of repairing and maintaining the roads using innovative materials in the Arctic region. We have conducted preliminary studies at UiT The Arctic University of Norway and found a suitable material that has potential to be applied on roads cracks or even coat the entire road. This is an ongoing work and has two main sections: 1) To investigate the suitable techniques ...
    • Statistical Optimization of Pyrolysis Process for Thermal Destruction of Plastic Waste Based on Temperature-Dependent Activation Energies and Pre-Exponential Factors 

      Alqarni, Ali; Un Nabi, Rao Adeel; Althobiani, Faisal; Naz, Yasin; Shukrullah, Shazia; Khawaja, Hassan; Bou-Rabee, Mohammed; Gommosani, Mohammad; Abdushkour, Hesham; Irfan, Muhammad; Mahnashi, Mater (Journal article; Tidsskriftartikkel; Peer reviewed, 2022-08-09)
      The massive increase in disposable plastic globally can be addressed through effective recovery methods, and one of these methods is pyrolysis. R software may be used to statistically model the composition and yield of pyrolysis products, such as oil, gas, and waxes to deduce an effective pyrolysis mechanism. To date, no research reports have been documented employing the Arrhenius equation in R ...
    • Statistical prediction and sensitivity analysis of kinetic rate constants for efficient thermal valorization of plastic waste into combustible oil and gases 

      Irfan, Muhammad; Un Nabi, Rao Adeel; Hussain, Hammad; Naz, Yasin; Shukrullah, Shazia; Khawaja, Hassan; Rahman, Saifur; Farid, Usman (Journal article; Tidsskriftartikkel; Peer reviewed, 2023-05-06)
      Sensitivity analyses of rate constants for chemical kinetics of the pyrolysis reaction are essential for the efficient valorization of plastic waste into combustible liquids and gases. Finding the role of individual rate constants can provide important information on the process conditions, quality, and quantity of the pyrolysis products. The reaction temperature and time can also be reduced through ...
    • Statistical Prediction of Rate Constants for the Pyrolysis of High-Density Plastic Waste 

      Un Nabi, Rao Adeel; Naz, Yasin; Shukrullah, Shazia; Khawaja, Hassan (Conference object; Konferansebidrag, 2022)
      The 400 million tons of waste plastic are disposed of around the world. A study reported by SINTEF estimates that the Norwegian fishing fleet dumps around 380 tons of plastic material in the ocean each year. This waste is increasing at an alarming rate, threatening aquatic life, polluting the environment, and causing serious diseases. Since this waste includes hydrocarbons and is a massive source ...
    • Strain Wave Analysis in Carbon-Fiber-Reinforced Composites subjected to Drop Weight Impact Test using ANSYS® 

      Andleeb, Zahra; Malik, Sohail; Khawaja, Hassan; Antonsen, Ståle; Hassan, Taimur; Hussain, Ghulam; Moatamedi, Mojtaba (Journal article; Tidsskriftartikkel; Peer reviewed, 2021-07-11)
      Composite materials are becoming more popular in technological applications due to the significant weight savings and strength these materials offer compared to metallic materials. In many of these practical situations, the structures suffer from drop impact loads. Materials and structures significantly change their behavior when submitted to impact loading conditions as compared to quasi-static ...
    • Study of the required thermal insulation (IREQ) of clothing using infrared imaging 

      Ahmad, Tanveer; Rashid, Taimur; Khawaja, Hassan Abbas; Moatamedi, Mojtaba (Journal article; Tidsskriftartikkel; Peer reviewed, 2017)
      The sense of cold develops due to the increase in heat loss from a human body. Excessive cold can be a health hazard, since excessive heat loss from the body may result in hypothermia/frostbite. Decreased body temperature due to heat loss also affects the physical, manual and perceptive performance of individuals. Therefore, protective measures are taken through clothing that controls and regulates ...
    • Study Of Wind Chill Effect and Thermal Insulation Using Infrared Imaging 

      Ahmad, Tanveer; Khawaja, Hassan (Conference object; Konferansebidrag, 2017)
      Tanveer Ahmad presented his findings on using Infrared Imaging to identify the wind chill-effect and insulation of winter clothing. He showed qualitatively that IR can detect the effects of wind chill and conducted experiments to obtain data with a view to establishing metrics which can be used to assess the effectiveness of survival gear. An unusual item that cropped up during the presentation was ...
    • Supporting students to prepare for higher education studies: Enhancing English writing skills with formative peer assessment 

      Takamine, Kaori (Conference object; Konferansebidrag, 2022-10)
      Studies report that writing skills of many beginner students in Norwegian higher education institutions are not adequately developed, showing a lack of critical thinking and referencing technique and a poor requisite language ability (Lødding and Aamodt 2015, Wollcheid et al. 2020). Literature also shows that a traditional lecture setting does not help students to enhance their learning autonomy ...
    • A systematic review of operating room ventilation 

      Sadrizadeh, Sasan; Aganovic, Amar; Bogdan, Anna; Wang, Cong; Afshari, Alireza; Hartmann, Anne; Croitoru, Cristiana; Khan, Amirul; Kriegel, Martin; Lind, Merethe; Liu, Zhijian; Melikov, Arsen; Mo, Jinhan; Rotheudt, Hansjörg; Yao, Runming; Zhang, Yixian; Abouali, Omid; Langvatn, Håkon; Sköldenberg, Olof; Cao, Guangyu (Journal article; Tidsskriftartikkel; Peer reviewed, 2021-05-18)
      Ventilation systems are the primary way of eliminating airborne pathogenic particles in an operating room (OR). However, such systems can be complex due to factors such as different surgical instruments, diverse room sizes, various staff counts, types of clothing used, different surgical types and duration, medications, and patient conditions. OR ventilation should provide a thermally comfortable ...
    • Thermoelastic Investigation of Carbon-Fiber Reinforced Composites using Drop Weight Impact Test 

      Andleeb, Zahra; Malik, Sohail; Khawaja, Hassan; Nordli, Anders Samuelsen; Antonsen, Ståle; Hussain, Ghulam; Moatamedi, Mojtaba (Journal article; Tidsskriftartikkel; Peer reviewed, 2020-12-28)
      Composite materials are becoming more popular in technological applications due to the significant weight savings and strength these materials offer compared to metallic materials. In many of these practical situations, the structures suffer from drop impact loads. Materials and structures significantly change their behavior when submitted to impact loading conditions as compared to quasi-static ...
    • Towards a Framework for Noctilucent Cloud Analysis 

      Sharma, Puneet; Dalin, Peter; Mann, Ingrid (Journal article; Tidsskriftartikkel; Peer reviewed, 2019)
      In this paper, we present a framework to study the spatial structure of noctilucent clouds formed by ice particles in the upper atmosphere at mid and high latitudes during summer. We studied noctilucent cloud activity in optical images taken from three different locations and under different atmospheric conditions. In order to identify and distinguish noctilucent cloud activity from other objects ...
    • Transient Model of an RSW System with CO2 Refrigeration – A Study of Overall Performance 

      Brodal, Eivind; Jackson, Steven; Eiksund, Oddmar (Journal article; Peer reviewed; Tidsskriftartikkel, 2017-11-07)
      Refrigerated seawater (RSW) cooling using CO2 based refrigeration is a relatively new technology that shows promising performance in cold climates. For being a refrigerant CO2 has a low global warming potential (GWP) and is therefore recognized as an environmentally friendly alternative if the unit is competitive on energy efficiency. However, RSW systems with CO2 have a significant reduction in ...
    • A two-component nonlinear variational wave system 

      Nordli, Anders Samuelsen; Aursand, Peder Kristian (Journal article; Tidsskriftartikkel; Peer reviewed, 2023-11-14)
      We derive a novel two-component generalization of the nonlinear variational wave equation as a model for the director field of a nematic liquid crystal with a variable order parameter. The equation admits classical solutions locally in time. We prove that a special semilinear case is globally well-posed. We show that a particular long time asymptotic expansion around a constant state in a moving ...
    • UA and pinch point temperature difference modeling — Finding the best heat exchanger schemes 

      Brodal, Eivind; Jackson, Steven; Hailu, Getu (Journal article; Tidsskriftartikkel; Peer reviewed, 2022-11-28)
      Process models using simplified heat exchanger (HE) models are often analyzed using methods based on derivatives or optimization procedures, where even small numerical errors can cause algorithms to fail. This article explores the use of numerical approximations for calculating pinch temperature and UA-value, including novel high-order polynomial methods using equidistant and Chebyshev grids. The ...
    • Understanding Physical Properties of Fresh Water and Marine Ice using Multiphysics Modelling and Infrared Thermography 

      Khawaja, Hassan (Conference object; Konferansebidrag, 2023)
      Ice has unique physical properties, which tend to vary depending on how, where, and when it forms. In the presented work, we looked deeper into various physical properties of ice. In one of the studies, we focused on studying the ice adhesion on two types of polymers; polyurethane (PU) and polyvinyl-chloride (PVC). It revealed interesting behaviors with a viable potential for roads/highways coated ...
    • Using Deep Learning Methods for Segmenting Polar Mesospheric Summer Echoes 

      Domben, Erik Seip; Sharma, Puneet; Mann, Ingrid (Journal article; Tidsskriftartikkel; Peer reviewed, 2023-08-31)
      Polar mesospheric summer echoes (PMSE) are radar echoes that are observed in the mesosphere during the arctic summer months in the polar regions. By studying PMSE, researchers can gain insights into physical and chemical processes that occur in the upper atmosphere—specifically, in the 80 to 90 km altitude range. In this paper, we employ fully convolutional networks such as UNET and UNET++ for ...
    • Using Infrared Thermography and Multiphysics Modelling to Investigate Ice 

      Khawaja, Hassan (Conference object; Konferansebidrag, 2022)
    • Validation of air ventilation in tunnels, using experiments and computational fluid dynamics 

      Myrvang, Torgeir; Khawaja, Hassan (Journal article; Tidsskriftartikkel; Peer reviewed, 2018)
      The study presented in this paper concerns the ventilation system inside tunnels. The ventilation system is responsible for the removal of exhaust gases produced by vehicles and for providing a clear view throughout the tunnels in routine operations and in the event of fire. The ventilation system has several stages, which are equipped with one or more fans and can be activated together or separately. ...
    • Ventilation design conditions associated with airborne bacteria levels within the wound area during surgical procedures: a systematic review 

      Aganovic, Amar; Cao, Guangyu; Fečer, Tomáš; Ljungqvist, Bengt L.; Lytsy, Birgitta; Radtke, Andreas; Reinmüller, Berit; Traversari, Roberto A.A.L. (Journal article; Tidsskriftartikkel; Peer reviewed, 2021-04-26)
      Without confirmation of the ventilation design conditions (typology and airflow rate), the common practice of identifying unidirectional airflow (UDAF) systems as equivalent to ultra-clean air ventilation systems may be misleading, but also any claims about the ineffectiveness of UDAF systems should be doubted. The aim of this review was to assess and compare ventilation system design conditions for ...