Show simple item record

dc.contributor.advisorSziebig, Gabor
dc.contributor.authorPlotnikov, Dmitri
dc.date.accessioned2018-08-22T08:44:15Z
dc.date.available2018-08-22T08:44:15Z
dc.date.issued2018-08-21
dc.description.abstractThis master thesis contains an overview of the additive manufacturing technology and building process of the large-scale Fused Deposition Modelling (FDM) additive manufacturing machine from the old Wafer Handling Diffusion machine. The thesis study is mainly focused on practical work and describes the techniques used during the project execution. The built machine can print large 3D prototypes from PLA plastic of three different colors. The final product of this thesis is a fully working large-scale AM machine made with the relatively small budget of 10.000 NOK which the university can use for educational purposes.en_US
dc.identifier.urihttps://hdl.handle.net/10037/13526
dc.language.isoengen_US
dc.publisherUiT Norges arktiske universiteten_US
dc.publisherUiT The Arctic University of Norwayen_US
dc.rights.accessRightsopenAccessen_US
dc.rights.holderCopyright 2018 The Author(s)
dc.subject.courseIDSHO6266
dc.subjectVDP::Teknologi: 500::Industri- og produktdesign: 640en_US
dc.subjectVDP::Technology: 500::Industrial and product design: 640en_US
dc.subject3D printeren_US
dc.subjectAdditive Manufacturingen_US
dc.subjectAMen_US
dc.subjectFused Deposition Modellingen_US
dc.subjectFDMen_US
dc.subjectlarge scale additive manufacturing machineen_US
dc.titleLarge-Scale Additive Manufacturing Machineen_US
dc.typeMaster thesisen_US
dc.typeMastergradsoppgaveen_US


File(s) in this item

Thumbnail
Thumbnail
Thumbnail

This item appears in the following collection(s)

Show simple item record