ub.xmlui.mirage2.page-structure.muninLogoub.xmlui.mirage2.page-structure.openResearchArchiveLogo
    • EnglishEnglish
    • norsknorsk
  • Velg spraakEnglish 
    • EnglishEnglish
    • norsknorsk
  • Administration/UB
View Item 
  •   Home
  • Fakultet for naturvitenskap og teknologi
  • Institutt for fysikk og teknologi
  • Artikler, rapporter og annet (fysikk og teknologi)
  • View Item
  •   Home
  • Fakultet for naturvitenskap og teknologi
  • Institutt for fysikk og teknologi
  • Artikler, rapporter og annet (fysikk og teknologi)
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Relationship between the source size at the diffuser plane and the longitudinal spatial coherence function of the optical coherence microscopy system

Permanent link
https://hdl.handle.net/10037/17459
DOI
https://doi.org/10.1364/JOSAA.36.000D41
Thumbnail
View/Open
article.pdf (1.123Mb)
Accepted manuscript version (PDF)
Date
2019-11-25
Type
Journal article
Tidsskriftartikkel
Peer reviewed

Author
Usmani, Kashif; Ahmad, Azeem; Joshi, Rakesh; Dubey, Vishesh Kumar; Butola, Ankit; Mehta, Dalip Singh
Abstract
Coherence properties of light sources are indispensable for optical coherence microscopy/tomography as they greatly influence the signal-to-noise ratio, axial resolution, and penetration depth of the system. In the present paper, we report the investigation of longitudinal spatial coherence properties of a pseudothermal light source (PTS) as a function of the laser spot size at the rotating diffuser plate. The laser spot size is varied by translating a microscope objective lens toward or away from the diffuser plate. The longitudinal spatial coherence length, which governs the axial resolution of the coherence microscope, is found to be minimum for the beam spot size of 3.5 mm at the diffuser plate. The axial resolution of the system is found to be equal to an ∼13µm at 3.5 mm beam spot size. The change in the axial resolution of the system is confirmed by performing the experiments on standard gauge blocks of a height difference of 15 µm by varying the spot size at the diffuser plate. Thus, by appropriately choosing the beam spot size at the diffuser plane, any monochromatic laser light source can be utilized to obtain high axial resolution irrespective of the source’s temporal coherence length. It can provide speckle-free tomographic images of multilayered biological specimens with large penetration depth. In addition, a PTS avoids the use of any chromatic-aberration-corrected optics and dispersion-compensation mechanism unlike conventional setups.
Publisher
Optical Society of America
Citation
Usmani, Ahmad A, Joshi, Dubey VK, Butola A, Mehta DS. Relationship between the source size at the diffuser plane and the longitudinal spatial coherence function of the optical coherence microscopy system. Optical Society of America. Journal A: Optics, Image Science, and Vision. 2019;36(12):D41-D46
Metadata
Show full item record
Collections
  • Artikler, rapporter og annet (fysikk og teknologi) [1057]
© 2019 Optical Society of America

Browse

Browse all of MuninCommunities & CollectionsAuthor listTitlesBy Issue DateBrowse this CollectionAuthor listTitlesBy Issue Date
Login

Statistics

View Usage Statistics
UiT

Munin is powered by DSpace

UiT The Arctic University of Norway
The University Library
uit.no/ub - munin@ub.uit.no

Accessibility statement (Norwegian only)