Show simple item record

dc.contributor.advisorMauseth, Guy Beeri
dc.contributor.advisorNicklasson, Per Johan
dc.contributor.authorKurup, Anirudh
dc.date.accessioned2022-05-20T08:56:36Z
dc.date.available2022-05-20T08:56:36Z
dc.date.issued2021-05-20
dc.description.abstractThe design of the frame and casing for two types of battery storage systems was carried out through a product development process on behalf of RePack AS. The primary design objectives were clarified using an objective tree method. The main functions of the designs were explored, and the product requirements were compiled stating the various demands and wishes pertaining to the products. Design concepts were generated for each type of product presented which resulted in two detailed concepts, with one having a prototype made at labs in UiT Narvik. The concepts presented are supported with calculations, finite element analysis using ANSYS R1 2021 academic, and material selection using ANSYS academic Granta.en_US
dc.identifier.urihttps://hdl.handle.net/10037/25232
dc.language.isoengen_US
dc.publisherUiT Norges arktiske universiteten_US
dc.publisherUiT The Arctic University of Norwayen_US
dc.rights.accessRightsopenAccessen_US
dc.rights.holderCopyright 2021 The Author(s)
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/4.0en_US
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)en_US
dc.subject.courseIDEND-3900
dc.subjectVDP::Technology: 500::Industrial and product design: 640en_US
dc.subjectVDP::Teknologi: 500::Industri- og produktdesign: 640en_US
dc.titleFrame and casing design of second life battery energy storage systemsen_US
dc.typeMaster thesisen_US
dc.typeMastergradsoppgaveen_US


File(s) in this item

Thumbnail
Thumbnail

This item appears in the following collection(s)

Show simple item record

Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)