Viser treff 61-80 av 916

    • A CFD Study of Preventing Snow Accumulations on Roofs using Airflows 

      Sjøveian, Andreas; Andleeb, Zahra; Khawaja, Hassan Abbas; Moatamedi, Mojtaba (Conference object; Konferansebidrag, 2023-12)
      Today, there is an abundance of roof designs for buildings, each possessing distinct characteristics when subjected to snowy and cold conditions. Snow buildup on roofs poses various risks, including structural damage and personal injuries. Snow loads can lead to severe building damage or even collapse. The presence of intricate roof shapes and valleys exacerbates the potential harm caused by snow. ...
    • Current source Inverter for fuel cell Application 

      Hamad, Zainab (Master thesis; Mastergradsoppgave, 2023-08-14)
      In recent years, the scientific renaissance has turned towards alternative energy. Scientific research and dissertations of all degrees, doctoral, Master, and even bachelor's degrees include. Green energy and alternative solution to protect the environment from increasing pollution. Different inverters have been used to increase the potential for power resulting from devices that do not have the ...
    • Investigation of ballast water conditions using remote sensing. Suspended Particulate Matter Characterization in Emden Sea Port 

      Taña i Viñeta, Pau (Master thesis; Mastergradsoppgave, 2023-05-22)
      This thesis investigates the use of remote sensing techniques to study the conditions of ballast water in the northwestern port of Emden, Germany. Sentinel-2 data of the seaport has been collected and used in order to retrieve the suspended particulate matter (SPM), evaluating its distribution and checking for any time or spatial periodicity over the past 5 years. The aim of the study is to provide ...
    • Optimization of industrial power grid of Narvik 

      Khan, Md Nafis Ul Hoq (Master thesis; Mastergradsoppgave, 2023-05-22)
      The objective of this study is to review a comprehensive plan for optimization framework for the industrial power grid. Few factors considered such as power generation, transmission, distribution, energy storage solutions, cost development. The aim targets an overview of planning and optimization for a hydrogen production plant in Narvik region. It will improve the overall efficiency, stability, ...
    • Energy Conversion and Control of Hydrogen Fuel Cell Based Electric Transport 

      Subedi, Jhalak Nath (Master thesis; Mastergradsoppgave, 2023-05-22)
      The research investigates the effective utilization of hydrogen fuel cells in electric transport applications, addressing the challenges associated with power generation, energy storage, and control. By implementing the MPPT Perturb and Observe (P&O) technique, the thesis aims to optimize the power output of the fuel cell system, ensuring maximum efficiency and performance. To enhance the overall ...
    • A Study of Dynamic Wind Effects on High-Rise Building with Tube-in Tube System in Norway 

      Pham, Son Hoang; Abujayyab, Abdelrahman Bassam (Master thesis; Mastergradsoppgave, 2023-05-15)
      According to a new high-rise strategy, Norway is expected to have more tall buildings. However, due to a lack of knowledge and experience in high-rise technology, the country has not built many such structures yet. To address this issue, a study was conducted to analyze the response of a high-rise building to dynamic wind load, considering the low seismic activity in the region. The study is divided ...
    • Solar angle optimizer 

      Haque, Md Emranul (Master thesis; Mastergradsoppgave, 2023-05-22)
      The demand for renewable energy sources has increased significantly in recent years due to the growing concerns about climate change and environmental sustainability. Solar energy has emerged as one of the most promising and widely used renewable energy sources. However, the efficiency and output of solar energy systems depend on various factors, including the position of the sun, the angle ...
    • Investigation of wireless electrification for a reconfigurable manufacturing cell 

      Al-Sallami, Hussein Mahdi Yaseen; Arnarson, Halldor; Solvang, Bjørn; Bremdal, Bernt Arild (Journal article; Tidsskriftartikkel; Peer reviewed, 2023-02-24)
      Reconfigurable manufacturing systems (RMS) with a rearrangeable structure can quickly adjust their productivity to meet the dynamic market changes and the demand for high-variety products. Industry 4.0 technologies have enhanced the RMS flexibility and made the automation of the reconfiguration of the manufacturing system possible. As an Industry 4.0 technology, wireless power transfer (WPT) can ...
    • Analysis of parameters influencing pathogen concentration in a room with displacement ventilation using computational fluid dynamics and Taguchi methods 

      Yuce, Bahadir Erman; Aganovic, Amar; Nielsen, Peter Vilhelm; Wargocki, Pawel (Journal article; Tidsskriftartikkel; Peer reviewed, 2023-10-30)
      Analyzing multiple physical factors simultaneously to determine optimal ventilation solutions can be challenging. Furthermore, this type of analysis needs a large case number to be investigated, making the problem’s solution unfeasible. This study tackled these challenges by integrating Computational Fluid Dynamics (CFD) with the Taguchi method to overcome these issues. Our previous research ...
    • Designing and Implementation of grid-connected separately excited DC Machine 

      Haruna, Muhammad (Master thesis; Mastergradsoppgave, 2023-05-22)
      This thesis presents the design and implementation of SEDC machine which was located at machine laboratory in UiT Narvik campus. To improve the efficiency and to have automatic control, the old passive control needs to be replaced with DC-DC converters based active control method. This thesis explores various DC-DC and grid connected converter with the goal to find a suitable and most efficient for ...
    • Current source inverter 

      Mohammadi, Abdul Qudoos (Master thesis; Mastergradsoppgave, 2023-05-22)
      ABSTRACT The growth of the world’s population leads to increased energy needs. The use of fossil energy leads to challenges. The main reason for this is that the use of fossil fuels has a negative impact on global climate change, and the world is heading towards running out of fossil fuels in a few years. Renewable energy sources like photovoltaic and wind power plants are good solutions for those ...
    • Prestasjonsoppfølging av elektriske brytere via datahøsting og analyse av plattformdata 

      Solrød, Andreas (Master thesis; Mastergradsoppgave, 2023-05-21)
      This thesis is a study of data material extracted from log files belonging to the oil and gas installation Norne. The data is put into a system, analyzed, and assessed how it can be used to drive performance monitoring of electrical switches. The thesis presents theory related to the task about ignition source, tag, maintenance and time determinations, the systems SAS and SMS on which the logs are ...
    • Seasonal storage of energy at UiT the arctic university of Norway in Narvik 

      Alfnes, Dennis (Master thesis; Mastergradsoppgave, 2023-05-22)
      The thesis examines which energy production methods are suitable together with seasonal storage of energy at UiT the arctic university of Norway in Narvik. Nordkraft has provided the subject which has been examined. The location of UiT Narvik together with its areas and storage volumes have been examined for what power production methods and energy storage methods are suitable for this location. ...
    • Integrating sensors for robots operating on offshore oil and gas platforms 

      Tolue, Shabnam (Master thesis; Mastergradsoppgave, 2023-05-21)
      This thesis presents a solution to integrate sensors and instruments on a robot to be used instead of operators on unmanned oil and gas offshore platforms. Operators have various tasks from inspection to maintenance in the platforms. Because of high costs of having operators in offshore platforms, there has been always an ambitious to design a fully unmanned automated platform to decrease the costs ...
    • Impact of Inverter Based Resources on System Stability in Low Inertia Power System Network 

      Zafar Raja, Hasnain (Master thesis; Mastergradsoppgave, 2023-05-20)
      Inverter-based resources (IBRs), such as solar and wind power are gaining popularity because of their increasing acceptance, environmental benefits and decreasing costs. However, their integration into power systems can lead to significant impacts on system inertia and frequency stability, which are crucial for maintaining the reliability of the power grid. In traditional power systems, the synchronous ...
    • Time Series Forecasting of Reactive Power Support from Smart Converters in SDN Using Machine Learning 

      Aziz, Mujtaba (Master thesis; Mastergradsoppgave, 2023-05-19)
      The climate changes in the last few years created a major need to integrate more renewable energy sources and other low-carbon technologies into the power system network. This causes to face more changes in the power system network, which are particularly visible in distribution power networks. A higher penetration of the distributed energy resources, installed at low- voltage and or medium-voltage ...
    • Hypotese verifisering av tilslagstype innflytelse på CMOD av fiber betong. 

      Klausen, Richard-Mathias (Master thesis; Mastergradsoppgave, 2023-05-15)
      Tilsetting av fiber i betong har vært noe som lenge har vært benyttet for å tilføre strekkegneskaper i betongen og hindre blant annet riss i betongen. Det har i de siste årene vært et ønske om å undersøke om det er forsvarlig å bruke fiber betong i bærende konstruksjoner, og ikke kun i fundamenter og sprøytebetong som fiber har normalt sett vært benyttet til. Etter publiseringen av NB.38 i 2020 har ...
    • Konseptløsning for klimaskjerming på Jernvassdammen 

      Hjallar, Ingrid Evita Antonsen (Master thesis; Mastergradsoppgave, 2023-05-15)
      Denne oppgaven har utforsket konseptet om å bygge en klimaskjerm rundt Jernvassdammen i Nord-Norge, med integrerte solcellepaneler som en del av skjermen. Motivasjonene bak dette konseptet er å skape en «vinn-vinn situasjon» der både dammens fysiske integritet og bærekraftige energiproduksjon blir fremmet. Oppgaven har evaluert tilstanden til Jernvassdammen og funnet at selv om betongkonstruksjonen ...
    • Estimating the Available Energy Flexibility A case study of Helgeland 

      Klæboe, Johanne Holst (Master thesis; Mastergradsoppgave, 2023-05-14)
      This thesis project was commissioned by Cegal and aimed to investigate the potential for demand-side flexibility in the Helgeland region, as well as evaluate forecasting methods for a demand-response system. The future energy situation in the area was analyzed, while the experimental part investigated forecasting methods which can be applied in a demand-response system. Finally, the project i ...
    • Durability of low carbon concrete verified by various curing conditions for freeze-thaw testing 

      Husby, Martin-André Stormdalshei (Master thesis; Mastergradsoppgave, 2023-05-15)
      This study investigated the feasibility of producing low carbon concrete (LCC) using supplementary cementitious materials (SCMs) and evaluated their impact on concrete F-T durability. Variations in the curing conditions were done to see the effect it had on the F-T resistance. These results were then supported by compressive- and chloride migration testing. The performance of different concrete ...