• Å studere effekt av isolasjonsmaterialet[s] posisjon i en husvegg 

      Anwar, Mohammad (Master thesis; Mastergradsoppgave, 2016-11-01)
      Rapporten tar for seg en eksperimentelle analyse i for bindelse med varmetransports gjennomyttervegger. Det teoretiske grunnlaget tar for seg Energitap gjennomvegger, varmeoverføringsfaktorer og fordeling i yttervegger. Numeriske beregninger og Simuleringer er utført for å studere virkninger av isolasjonsmaterialer i varmt og kaldforhold.
    • BIM 4D - Prosjektstyring og visualisering. Ved prosjektet Østensjøveien 16. BIM 4D – Project management and visualization 

      Bogen, Trym Håvard (Master thesis; Mastergradsoppgave, 2018-08-16)
      This thesis describes building information modeling focusing on the fourth dimension using a specific software. Within this possibilities and challenges with the use of the fourth dimension during an ongoing project are presented, as well as suggestions on how this can be communicated on site. The literature study describes basic theory for both project planning, project management and building ...
    • Biogas from Organic Waste - A Case Study 

      Mustafa, Mohamad; Calay, Rajnish K; Roman, Elisabeth (Peer reviewed; Journal article; Tidsskriftsartikkel, 2016-07-01)
      This paper presents a case study to investigate the potential for upgrade of a bio-waste treatment plant. The paper also discusses development potentials in order to optimize the plant for maximum energy and environmental benefits. Data gathered over two consecutive years about the production of biogas, energy and bio-rest were considered and mass balance analysis of inputs and outputs of the ...
    • Brannprosjektering av automatiske parkeringsanlegg 

      Ajaypal, Powar; Omtveit, Talleiv (Master thesis; Mastergradsoppgave, 2021-05-18)
      Automatiske parkeringsanlegg er en innovativ parkeringsløsning som løser plassutfordringene som følge av befolkningsvekst, sentralisering og fortetning, men medfører samtidig nye utfordringer med hensyn til brannsikkerheten. Der en parkeringsplass tidligere var forbeholdt én bil, kan det i denne typen parkeringsanlegg være stablet flere biler i høyden. For rednings- og slokkemannskaper medfører disse ...
    • Brannprosjektering av automatiske parkeringsanlegg (Fire design of automatic parking systems) 

      Powar, Ajaypal; Omtveit, Talleiv (Master thesis; Mastergradsoppgave, 2021-05-18)
      Automatiske parkeringsanlegg er en innovativ parkeringsløsning som løser plassutfordringene som følge av befolkningsvekst, sentralisering og fortetning, men medfører samtidig nye utfordringer med hensyn til brannsikkerheten. Der en parkeringsplass tidligere var forbeholdt én bil, kan det i denne typen parkeringsanlegg være stablet flere biler i høyden. For rednings- og slokkemannskaper medfører disse ...
    • Brannsikring av ventilasjonskanaler. Fire safety in ventilationducts 

      Aastorp-Tangen, Sigve; Gjendem, Jan Rachid (Master thesis; Mastergradsoppgave, 2016-11-17)
      Brannsikring av ventilasjonssystemer har fått svært mye fokus de siste årene, på grunn av uklare retningslinjer for prosjekterende. TEK10 setter kun funksjonskrav for hvordan tekniske installasjoner skal brannsikres, og det er dermed opp til de prosjekterende å sette opp løsninger innenfor lovverket. På bakgrunn av det uklare regelverket ble det nedsatt en gruppe med rådgivere for å utarbeide en ...
    • Bridging Law Application to Fracture of Fiber Concrete Containing Oil Shale Ash 

      Upnere, Sabine; Novakova, Iveta; Jekabsons, Normunds; Krasnikovs, Andrejs; Macanovskis, Arturs (Journal article; Tidsskriftartikkel, 2023-07-23)
      Concrete is a widely used material in various industries, including hazardous waste management. At the same time, its production creates a significant carbon footprint. Therefore, intensive research is being conducted to create more eco-friendly concrete, for example, partially replacing cement with by-products such as oil shale ash (OSA) or improving properties by adding dispersed fibers such as ...
    • Bruk av prefabrikkerte ytterveggselementer 

      Vollstad, Håkon (Master thesis; Mastergradsoppgave, 2021-05-15)
      Arbeidsproduktiviteten i bygg- og anleggsnæringen i Norge fortsetter med en negativ trend, samtidig som byggekostnadsindeksen for nybygg stiger. Næringsaktører identifiserer et betydelig forbedringspotensial i bransjen. Flere peker på standardisering og prefabrikasjon som en del av løsningen. Consto Nord har bred erfaring med bruk av prefabrikkerte ytterveggselementer, både ved innkjøp og egen ...
    • Byggetekniske løsninger for kalde og arktiske strøk (Building design & solutions for cold and arctic environment) 

      Sara, Bernt Ailu Utsi; Blegeberg, Magnus Moland (Master thesis; Mastergradsoppgave, 2019-06-27)
      In recent years, there has been an increacing focus on environmental issues and the ongoing climate change. With predictions of increasing rainfall and more extreme weather, this poses a greater risk of damage to buildings, which again places stricter requirements on construction details. In Norway, there has been focus on construction in cold and arctic regions, and the impact on existing buildings ...
    • Byggteknisk droneinspeksjon 

      Høiseth, Hege Therese (Master thesis; Mastergradsoppgave, 2022-05-16)
      Hjelpemidler og utstyr i byggebransjen er i stadig endring. Muligheten for å kunne gjennomføre byggtekniske inspeksjoner på en bedre måte er på god vei, nemlig ved bruk av droner. Droneinspeksjoner har blitt mer vanlig i de siste årene, da særlig på grunn av kostnadsbesparelse og innovasjon. Tema for denne oppgaven er byggteknisk droneinspeksjon, og hvilke fordeler og ulemper er det ved bruk av ...
    • Bygningsfysiske utfordringer i forbindelse med kalde garasjeanlegg 

      Pettersen, Emil; Pettersen, Bjørn Anders (Master thesis; Mastergradsoppgave, 2019-06-26)
      "Årlig koster byggeskader samfunnet 17 milliarder, gjennom undersøkelser utført av SINTEF byggforsk er det konkludert med at 65-70 prosent av disse byggeskadene skyldes fukt (TU, 2017). Bygge skader som dette har resultert i at Plan og bygningsloven (PBL) og Direktoratet for byggkvalitet (DIBK) utarbeidet en ny forskrift som trådte i kraft pr. 1.1.2013 som ett tiltak på å redusere bygge skader. ...
    • Bærekraftig rehabilitering av høyblokker 

      Erdal, Eirik Friis (Master thesis; Mastergradsoppgave, 2021-05-14)
      Denne oppgaven handler om forskjellige skademekanismer i betong og hvordan kartlegge disse samt hvilke metoder som brukes for å utbedre disse. Det er også tatt utgangspunkt i en eldre betongblokk på åtte etasjer som brukes som studentboliger av Norges Arktiske Studentsamkipnad i Tromsø. Denne betongblokken er bygget i 1972 og har behov for omfattende rehabilitering av utvendige bærende betongsøyler ...
    • Circular economy: Challenges and opportunities in the construction sector of Kazakhstan 

      Torgautov, Beibut; Zhanabayev, Asset; Tleuken, Aidana; Turkyilmaz, Ali; Mustafa, Mohammad; Karaca, Ferhat (Journal article; Tidsskriftartikkel; Peer reviewed, 2021-10-24)
      The circular economy in the construction sector in emerging economies is one of the most promising concepts that aims to keep the value of the construction materials and structures as long as possible. The construction industry is rapidly developing in Kazakhstan with a yearly increase in projects. This research paper investigates the construction sector in Kazakhstan in terms of the potential ...
    • Comparison of “Zero Emission” Vehicles with Petrol and Hybrid Cars in Terms of Total CO2 Release—A Case Study for Romania, Poland, Norway and Germany 

      Lieutenant, Klaus; Borissova, Ana Vassileva; Mustafa, Mohamad; McCarthy, Nick; Iordache, Ioan (Journal article; Tidsskriftartikkel; Peer reviewed, 2022-10-27)
      The authors compare the energy consumption and CO<sub>2</sub> emissions from vehicles using internal combustion engines (ICE), battery electric vehicles (BEV), fuel cell electric vehicles (FCEV), and two types of hybrid vehicles, BEV‐ICE hybrid and BEV‐FCEV hybrid. This paper considers several scenarios for four countries’ electricity production from primary energy sources to estimate total ...
    • A Comprehensive Summary of Available Legislation and Practices in Demolition and Construction & Demolition Waste Management in the Arctic Region 

      Novakova, Iveta; Drozdyuk, Tatiana; Ohenoja, Katja; Ayzenshtadt, Arcady; Arntsen, Bård; Perumal, Priyadharshini; Dyvesveen, Martin Skjerve (Journal article; Tidsskriftartikkel; Peer reviewed, 2021-07-17)
      The need for better natural resource use is currently increasingly recognised, and high emphasis is given to the circularity of building materials and the reduction of activities with negative environmental impact. Legislation, guidelines, and other documentation play an important role in improving demolition activities and construction and demolition waste (CDW) management. Good practices in CDW ...
    • Construction professionals’ perspectives on drivers and barriers of sustainable construction 

      Tokbolat, Serik; Karaca, Ferhat; Durdyev, Serdar; Calay, Rajnish K (Journal article; Tidsskriftartikkel; Peer reviewed, 2019-06-05)
      With the associated environmental challenges and unsustainable patterns of construction, there is also notable awareness and willingness among the state bodies to adopt sustainability measures and practices in Kazakhstan. This study explores the drivers of and barriers inhibiting the adoption of sustainability paradigm in the construction context of Kazakhstan. The drivers and barriers were validated ...
    • Control of Airborne Noise Generated in the Cavities of a T-Slotted Aluminum Cylindrical Column 

      Mustafa, Mohamad Y.; Yizhong, Xu; Sørensen, Bjørn Reidar; Santos, José; Al-Mahadin, Aziz (Peer reviewed; Chapter, 2018-06-11)
      This paper presents a study of airborne noise generated by a T-slotted cylindrical aluminum hollow column with six slots of the type used for the construction of communication towers. Noise is a very distracting phenomena and an environmental concern caused by various sources. Noise pollution is becoming more severe with the introduction of massive human activities and the use of heavy machineries, ...
    • Design basis for Arctic infrastructure facilities 

      Myrmel, Liv Brita Hætta; Gudmestad, Ove Tobias (Journal article; Tidsskriftartikkel; Peer reviewed, 2023-01-18)
      A discussion related to the selection of a proper design basis for Arctic infrastructure facilities is presented. The design basis, which must be sufficiently robust to ensure safe operations of the facilities during their planned lifetime, should include relevant information available from the local and indigenous people of the area. The need to properly document all data and assumptions made ...
    • Design of water shock tube for testing shell materials 

      Ji, Hongjuan; Mustafa, Mohamad; Khawaja, Hassan Abbas; Ewan, Bruce C.; Moatamedi, Mojtaba (Journal article; Tidsskriftartikkel; Peer reviewed, 2014-04-15)
      This paper presents design considerations for a shock tube experimental rig used to investigate the dynamic failure mechanisms of shell geometries subjected to water shock impact loading. In such setup, it is desirable that the drive pressure used within the tube can provide a wide range of impulsive loads on the test structures and some flexibility can be achieved on the applied pulse durations. ...
    • DEVELOPMENT OF METHOD AND CRITERIA FOR EVALUATION OF DRY-WASHING EFFICIENCY WITH RE-CON ZERO EVO 

      Novakova, Iveta; Norman, Sven-Henrik; Bista, Dipen (Chapter; Bokkapittel, 2022)
      Society recognises the need for the preservation of nature and the need for better resource utilisation. Integration of good practice in the building industry is mainly targeted at reducing or completely eliminating waste. One of the waste sources in the concrete industry is created in washing facilities and consists of returned concrete, washing water and cement slurry. Concrete trucks are washed ...