FPGA-based tracking system for GNSS receivers
This report presents the design and simulation of code and carrier tracking system for a GNSS receiver. The GNSS receiver processes the signal sent by satellites in space. These signal contain carrier wave signal, ranging code and navigation data in encrypted form. To demodulate the navigation data, the processing block should accurately track the phase of incoming code and the frequency of incoming carrier wave signal. In code tracking loop, a DLL is used where three replicas of incoming PRN code namely early PRN, prompt PRN and late PRN are generated and correlated with the incoming signal. The result of these correlators is a numerical value that determines how much the specific code replica correlates with the incoming PRN. Based on correlation value, a code loop discriminator decides in which direction the phase of the PRN code is to be shifted. Then a perfectly aligned PRN code is generated by the local code generator. In carrier tracking loop, a PLL is used where a local carrier wave signal is multiplied with the incoming signal to wipe off carrier signal and PRN code of the incoming signal. The output after multiplication is sent to the carrier loop discriminator to determine the carrier phase error. This error is filtered out using a carrier loop filter. Then the output from the filter is used as feedback to a NCO that generates a perfectly aligned carrier wave signal. The other half of this report deals with the VHDL programming of the tracking subsystems that can be synthesized in a FPGA kit. It should be noted that all subsystems of a tracking block cannot be hardware synthesized. A VHDL program and a testbench program for the subsystem that can be hardware synthesized is coded and tested in ISIM. Finally, a design for FPGA-based tracking system for GNSS receivers is proposed
ForlagUiT Norges arktiske universitet
UiT The Arctic University of Norway
MetadataVis full innførsel
Copyright 2017 The Author(s)
Følgende lisensfil er knyttet til denne innførselen:
Viser innførsler relatert til tittel, forfatter og emneord.
Solar panel tracking control. Tracking the variations caused due to reflection from snow and other factors Pandey, Saroj (Master thesis; Mastergradsoppgave, 2016-11-07)This report presents the design and simulations of a dual-axis solar tracker. This solar tracker works solely based on the output power of the PV panel mounted to it. It does not use any photosensors to orient the PV module. Describing the process in short, the position of the Sun is first calculated based on time and location information. Since this solar panel will be mounted here at UiT, ...
Fatiev, Dmitry (Master thesis; Mastergradsoppgave, 2015-05-15)Telementoring in image-guided surgery has long since become a worldwide trend, facilitating faster and better surgical expertise distribution, increased quality of learning for beginner surgeons and better clinical outcomes for patients who no longer have to wait for an expert to travel (or do not have to travel themselves). Since the early days of telementoring, telestration (freehand annotation) ...
Holm, Ragnhild Kosmo (Master thesis; Mastergradsoppgave, 2015-06-01)Nexans Rognan is a cable manufacturer located in Nordland County. Each new cable order have a set of requirements provided by the customer. The cable specifications change in terms of characteristics of fibre optical elements, type and quality of cable armouring and dimension and amounts of electrical conductors. Due to the variety in different cables produced, they also need a wide array of ...