Finite element analysis of materials for aquaculture net cages. FEA of materials for aquaculture net cages using ANSYS Workbench
Video file of the total deformation of the unreinforced nylon PA6 net with a velocity of 5 m/s. (Ukjent)
Video file of the equivalent stress for the PET-wire net with a velocity of 5 m/s (Ukjent)
ForfatterMyrli, Odd Einar Lockertsen
The number of good sites in less exposed locations for aquaculture farming is limited. Trends are now that the fish cages are increasing in both width and depth as well as more weather-exposed locations are taken into use. As the net cages continues to increase in size, so does the material costs. The design of the sea cages should be modified for safe and reliable use in remote offshore locations. Fish farms located in more exposed areas will be subject to more energetic waves and stronger currents, which will cause large net deformations. This is a challenge as fish welfare depends on a certain minimum volume within the net cage. Changing and maintaining net cages are some of the main expenses for fish farms. If the life time of the net cages are extended by introducing stronger, longer lasting materials, the overall costs of the nets would be reduced. The traditional nets are produced in nylon, while the promising solid PET-wire has been introduced to the aquaculture industry. In this paper, we introduce polyurethane to the aquaculture net cages, which will be studied together with nylon and PET-wire. The study is carried out using fluid-structure interaction (FSI) simulation, which is coupling of fluid dynamics (CFD) and structure mechanics (FEM). ANSYS® software is employed in the study. We will look at the materials that shows the most promising results for aquaculture purposes.
ForlagUiT The Arctic University of Norway
UiT Norges arktiske universitet
MetadataVis full innførsel
Copyright 2017 The Author(s)
Følgende lisensfil er knyttet til denne innførselen:
Viser innførsler relatert til tittel, forfatter og emneord.
Compositional differences in soybeans on the market: glyphosate accumulates in Roundup Ready GM soybeans Bøhn, Thomas; Cuhra, Marek; Traavik, Terje; Sanden, Monica; Primicerio, Raul (Journal article; Tidsskriftartikkel; Peer reviewed, 2014)This article describes the nutrient and elemental composition, including residues of herbicides and pesticides, of 31 soybean batches from Iowa, USA. The soy samples were grouped into three different categories: (i) genetically modified, glyphosate-tolerant soy (GM-soy); (ii) unmodified soy cultivated using a conventional ‘‘chemical’’ cultivation regime; and (iii) unmodified soy cultivated using an ...
Dyspriani, Polite (Master thesis; Mastergradsoppgave, 2007-05-29)Shrimp world production in the last few years has shown very high growth rates. It is marked by an increasing of production volume, and by shifting from capture to aquaculture fisheries within the production system. This has occurred mostly regarding to the brackish water pond. For some years, the government has had to face hard choices in order to ensure shrimp aquaculture developed sustainable. ...
Karlsen, Kine Mari (Doctoral thesis; Doktorgradsavhandling, 2011-08-26)The purpose of this thesis was to study granularity and its importance for traceability in seafood supply chains. The following hypothesis was applied in this thesis: The implementation of traceability of seafood is affected by the granularity level of the traceable units. Three sub-tasks were carried out to test the hypothesis: 1) identify critical traceability points (CTPs) of seafood products, ...